


Costs have increased by about 20%, and domestic second- and third-tier SSD brand manufacturers have begun to increase prices.
News from this website on September 6, TrendForce’s latest research shows that the recent NAND Flash spot market particle quotations have been driven by the news that the wafer contract price has successfully increased, and some product projects have seen more active inquiry demand.
TrendForce’s investigation found that the main reason for this price increase was that NAND Flash original manufacturers further increased prices with some Chinese benchmark module manufacturers in late August. This showed that the original manufacturers were unwilling to sell goods at low prices, thereby driving Wafer The spot market has seen short-term gains recently.
Existing channel vendors broke the news in Boban Tang: the cost price of upstream NAND wafer particles has increased by about 20%, causing domestic second- and third-tier SSD brand manufacturers to begin to implement price increases in the near future.
Due to the increase in the price of upstream NAND wafer particles and the increase in shipping quotations from traders, the cost price has increased by about 20%. Domestic second- and third-tier SSD brand manufacturers have recently begun to implement price increases. .
Some brands have experienced small price increases at the end of last month, and some brands plan to start raising prices in September. The first cost price increase is expected to be about 10%, and the overall increase can reach more than 15%. It is expected that most brands may choose to implement several rounds of price increase strategies one after another, mainly depending on market demand and terminal acceptance. If market demand is too poor and the price rise continues, the price increase may be blocked.

This site reported earlier that Samsung Electronics had previously planned to stop some of its NAND flash memory production equipment at its P1 factory in Pyeongtaek, South Korea. , and suspended quotations for the mature process of the sixth-generation V-NAND memory chip.
Previously, foreign media BusinessKorea reported that in the absence of significant improvement in market demand, Samsung Electronics and SK Hynix are facing considerable pressure, inventories are still at high levels, and they are considering continuing to reduce production in the second half of the year.
The current industry estimate is that "memory chip prices will rise early next year." However, foreign media said that if the price decline cannot be reversed as expected, the timing of price increases for related industry products will not be determined. avoidance of delay”.
Advertising statement: The external jump links (including but not limited to hyperlinks, QR codes, passwords, etc.) contained in the article are used to convey more information and save selection time. The results are for reference only. All articles on the site contain this statement.
The above is the detailed content of Costs have increased by about 20%, and domestic second- and third-tier SSD brand manufacturers have begun to increase prices.. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

According to news from this site on August 8, Samsung demonstrated a variety of new SSD products at the 2024 Flash Memory Summit (FMS) - PM1753, BM1743, PM9D3a, PM9E1, and also tested the ninth generation QLCV-NAND, TLCV-NAND and CMM-D –DRAM, CMM-HTM, CMM-HPM, and CMM-BCXL technologies were introduced. BM1743 uses QLC flash memory with a capacity of up to 128TB, a continuous read speed of 7.5GB/s, a write speed of 3.5GB/s, a random read of 1.6 million IOPS, and a write of 45,000 IOPS. It adopts a 2.5-inch form factor and a U.2 interface, and is idle Power consumption is reduced to 4W, and after subsequent OTA updates, only

According to news from this site on March 14, Western Digital launched the PCSN5000SNVMe solid-state drive. This product is equipped with BICS6 (162-layer) QLC flash memory and is a product for OEM manufacturers. ▲Photos of Western Digital PCSN5000S solid-state drive. Specifically, PCSN5000S uses PCIeGen4x4 interface, NVMe2.0 protocol, and is equipped with Western Digital’s latest self-developed main control. It has optional M.22280/2230 specifications and three capacity versions of 512GB/1TB/2TB. Support nCache4.0 dynamic SLC caching technology. In terms of parameters, the maximum sequential read speed of the three capacities of PCSN5000S is 6000MB/s, and the maximum sequential write rate is 4

This website reported on July 22 that ICEDOCK launched the ExpressSlotMB204MP-B four-bay M.2 solid-state drive extraction box on the 19th of this month. The extraction box adopts the shape of a PCIeAIC add-on card, requires PCIe6Pin auxiliary power supply, has a three-dimensional dimension of 204.5×21.59×126.9 (mm), supports the PCIe5.0 protocol, and can provide 16GB/s PCIe5.0×4 full-speed bandwidth for each solid-state drive. . Esidak ExpressSlotMB204MP-B SSD extraction box is compatible with M.22230/2242/2260/2280 SSDs. However, the thickness of each side of these SSDs must not exceed 1.5mm.

According to news from this website on March 11, source Yuki Yasuo-YuuKi_AnS recently shared a series of pictures of a Microsoft Z1000 solid-state drive sample on the X platform. From the label information, we learned that this Z1000 is an Engineering Sample (engineering sample) with a capacity of 960GB. It was produced on May 18, 2020. It is powered by DC3.3V and has a nominal power consumption of 15W. According to sources, it supports the NVMe1.2 protocol. ▲Microsoft Z1000 SSD front photo (with label) ▲Microsoft Z1000 SSD front photo (without label) ▲Microsoft Z1000 SSD back photo ▲Microsoft Z1000 SSD back photo - master control close-up reference Yuuki Yasuho-YuuKi_An

According to news from this site on August 7, Phison fully demonstrated its Pascari enterprise-class solid-state drive product line at the FMS2024 Summit. This product line covers 5 major categories and is targeted at various enterprise-level and data center applications. Here is a brief introduction on this site: X Series - Best Performance Phison's X Series enterprise-class SSDs are "designed for extreme writing requirements." In addition to the first X200 family, Phison also launched two PCIe 4.0 products, X100P and X100E, respectively 1DWPD and 3DWPD, with maximum capacities of 32TB Note 1. Both X100P and

According to news from this website on March 20, SK Hynix recently attended the NVIDIA GTC2024 conference and demonstrated the first Gen5NVMe solid-state drive series for the consumer market-Platinum P51M.22280NVMeSSD. PlatinumP51 is similar to GoldP31 and PlatinumP41. It uses a self-designed SSD master control, but the main highlight is the use of PCIeGen5 and 238-layer TLCNAND flash memory. Note from this site: Hynix acquired SSD master control manufacturer LAMD in 2012, giving it the ability to design its own master control. SK Hynix said at the booth that Platinum P51 will be launched in 500GB, 1TB and 2

According to news from this website on June 18, Samsung Semiconductor recently introduced its next-generation data center-grade solid-state drive BM1743 equipped with its latest QLC flash memory (v7) on its technology blog. ▲Samsung QLC data center-grade solid-state drive BM1743 According to TrendForce in April, in the field of QLC data center-grade solid-state drives, only Samsung and Solidigm, a subsidiary of SK Hynix, had passed the enterprise customer verification at that time. Compared with the previous generation v5QLCV-NAND (note on this site: Samsung v6V-NAND does not have QLC products), Samsung v7QLCV-NAND flash memory has almost doubled the number of stacking layers, and the storage density has also been greatly improved. At the same time, the smoothness of v7QLCV-NAND

According to news from this site on July 15, according to the WeChat public account ChannelGate, Kingston will launch a new generation of entry-level NVMe solid-state drive series NV3 in August. Kingston NV3 will still use the same PCIe4.0×4 specification as the existing product NV2. The sequential read speed will be increased to 6000MB/s, and the sequential write rate will also reach 5000MB/s, which is significantly higher than the 3500/2800MB/s of NV2. NV3 solid-state drives will cover four capacity points of 500GB, 1TB, 2TB, and 4TB, abandoning the 250GB version that appeared on NV2. This site noticed that the parameters of NV3 are similar to the KentingBay "KentingBay" previously displayed by Kingston at the 2024 Taipei International Computer Show.
