


Is it better to have a computer assembled or buy an all-in-one computer?
Whether to assemble a computer or buy an all-in-one machine has been confusing many users. PHP editor Yuzai brings you a comparison between these two options and analyzes their advantages and disadvantages from all aspects. Read on for details.
# Is it better to assemble the computer or buy it all in one?
I think it’s well assembled! First of all, in terms of configuration, the assembly machine can be freely matched with the configuration you like. If you have enough budget, you can equip it with a personalized chassis, various RGB lighting effects, RGB water cooling, etc., CPU, motherboard, graphics card, memory, hard disk, etc. can be done. With a balanced combination, it won’t be like most branded machines, which have a high CPU and only the lowest-end graphics card, which is commonly known as a bright machine and has no performance at all. Moreover, in the final analysis, branded machines are nothing more than formal and larger assembly plants, and there is not much difference in essence from those assembled by oneself! In terms of price, the price of brand-name machines is on the high side. The same configuration is several hundred to thousands of yuan higher than that of assembled machines. Finally, let’s talk about after-sales service. Nowadays, the after-sales service of assembled machines is also very good. If you buy it from JD.com’s self-operated website If there is a problem, Jingdong will pick it up at your door. If it can be replaced, it will usually be replaced by a new one. If you buy it at a local computer store, it also has a three-year warranty. Some minor problems can be repaired immediately, and there is usually no charge. He also sent the defects directly to the owner. To sum up, I think it is better to assemble it!
Is it better to use an all-in-one computer or an assembled computer?
The difference between all-in-one computers and assembly machines is as follows:
Computer assembly machines generally refer to the use of motherboards, hard drives, keyboards, speakers, video lenses and monitors, chassis, and power supplies in the market based on user requirements. When the split computer is assembled, the components are connected by connecting wires, which looks messy. Assembly machines generally have no brand. An all-in-one computer is a desktop computer that integrates a microprocessor, motherboard, hard drive, screen, speakers, video lens display, etc. First adopted by Apple. The advantage is that it is relatively compact, neat and space-saving. Most of them have brands.
It is the same in terms of use. Since the assembly machine is not a brand machine, it lacks perfect after-sales service. The quality is relatively less reliable than the brand machine, and the general price will be lower. Most all-in-one machines are brand-name machines with complete after-sales services, relatively reliable quality, and generally higher prices.
Comparison of the advantages and disadvantages of assembly and all-in-one machines:
Advantages of assembly: 1. Everything is decided by yourself. 2. Spend money clearly and clearly. 3. Cheap price. All-in-one machines include various other costs, among which labor costs are particularly high. 4. It is convenient for you to upgrade the machine, easy to disassemble and install.
Disadvantages of assembly: 1. No guarantee. No one can guarantee compatibility, and if something goes wrong there is no warranty. 2. You must have certain knowledge and the ability to install your own computer.
Advantages of one: 1. Guaranteed. If something breaks or something goes wrong, there are various warranties and replacements. 2. Compatibility is guaranteed, and the system, drivers, and software can all be installed on request, saving a lot of trouble.
Disadvantages of one: 1. There is a lot of wasted money to spend. 2. It is difficult to modify and cannot add memory. 3. You cannot decide the configuration by yourself.
Is it better to build a computer or a branded computer?
The following compares assembled computers and branded computers from two aspects:
Computer appearance and design:
Relatively speaking, branded computers have a more personalized design in appearance. , the appearance is more beautiful. In addition, in order to take care of some friends who are not very familiar with computers, many brand manufacturers will set up some faster functions on the keyboard, such as quick restart, one-click shutdown, and even one-click system recovery. In order to increase the competitiveness of their computer products, some manufacturers will develop additional functions for the system. At this point, assembling a computer is far from being comparable to a branded machine.
Computer stability:
brand computers have undergone rigorous testing before leaving the factory, and are well guaranteed in terms of compatibility and stability. But assembly machines are different. The selection and matching of accessories are completely based on personal wishes, which tests the user's computer skills. For example, some of the e-commerce complete machines on a certain website now have many things that you have never heard of, but they are selling very well. If you don't have some computer knowledge, you may be fooled. Branded machines have more advantages in this regard.
When buying a computer, is it better to build a computer or an all-in-one computer?
This question depends on you personally. If you are not a computer enthusiast and don’t like playing large games and drawing, then an all-in-one computer is suitable for you. All-in-one computers generally have lower configurations, but do not have some wiring, so there is no need to assemble them. It is suitable for people who are not proficient in computers and do not have high requirements for computer configuration. If your space is limited, an all-in-one machine is also a good choice, and all-in-one machines are brand-name machines. If the machine breaks, just contact the brand for after-sales service. If it is a combination During installation, you still have to determine which accessory is broken before you can replace it. In summary, the all-in-one machine is suitable for people who are not proficient in computers, do not have high configuration requirements, and have limited space; the assembly machine is suitable for people who are experienced in computers and have high configuration requirements. Based on your question, I think an all-in-one machine is suitable for you!
Is it better to use an all-in-one computer or an assembled computer?
The difference between all-in-one computers and assembly machines is as follows: Comparison of the advantages and disadvantages of assembly and all-in-one computers:
Is it better to assemble a computer or buy a fully assembled computer?
In fact, the difference between assembled machines and brand-name machines is the maintenance work. I sell computers. There are many brand-name machines, so the price of after-sales service will be higher.~ To use an analogy.
2000 to buy a brand-name machine~ Now spend 2000 to buy an assembly machine. The performance of the two machines is very different. The quality is actually about the same. All have warranty. Go to Zhongguancun and install it online. The difference between our market prices will not exceed fifty. Each hardwareIs it better to buy a new computer or build a computer?
Nowadays, desktop computer hardware technology has developed by leaps and bounds. Now there is no need to worry about bad problems in assembling computers. Assembling computers is closer to ordinary people than brand computers, because assembling computers has many advantages. High cost performance. Compared with assembled computers and branded computers, the price of assembled computers is much cheaper. This is an objective fact. Assembling a computer also has advantages that brand-name computers do not have, because assembling a computer allows you to choose the configuration you want. In other words, when assembling a computer, you can choose your own computer configuration and installation price, but brand-name desktop computers do not have such advantages. The price of a desktop computer has already been set when it leaves the factory. We can only choose to buy it or not. If we buy it, we have to accept its limited price and fixed configuration. So I think that assembled computers are better than branded computers at present.
Assembling a computer allows you to choose the hardware configuration as needed
There is another factor that makes an assembled computer better than a brand-name computer. This factor is: the convenience of computer hardware upgrades. When the assembled computer hardware configuration cannot meet the usage requirements, you can configure the computer hardware yourself without affecting the computer's warranty at all. It is troublesome to upgrade the hardware configuration of brand-name computers during the warranty period. Upgrading the hardware configuration by yourself may result in the manufacturer rejecting the warranty. In addition, the stability of private upgrades of brand-name computers is relatively poor, and after-sales upgrades of hardware configuration are very expensive. Therefore, current brand desktop computers generally cooperate with relatively large-scale units. Ordinary people generally do not choose brand desktop computers. Judging from the current computer market conditions, I think the value of brand desktop computers to survive in the market will become more and more important. The smaller the computer, the greater the possibility of being eliminated by society.
Is it better to assemble a computer or Lenovo computer?
It is definitely good to assemble a computer.
Because Lenovo computers are also assembled, why can't you assemble one yourself? You can still choose the accessories yourself. It may not be good if Lenovo's accessories are customized by them. The company's computer is Lenovo. When I took it apart, I found many problems. The connecting cable was too short, the power supply was from an unknown brand, and other accessories were not used well. You can choose the one that suits you best.
Is it better to buy a pre-assembled computer or an original computer?
It’s good to assemble computers
1. The advantage of original computers over assembled computers is that they are more stable than assembled machines. They have good brand guarantee and high-quality after-sales service. These are the advantages of assembling computers. Less than.
2. The advantage of assembling a computer is that it has good upgrade space. In the later stages, you can upgrade the hardware according to your own needs. At the same price, the assembled machine is more cost-effective than the original machine, and an accessory can be upgraded individually when needed.
3. Therefore, compared with the original machine, it is recommended to buy an assembled machine, but if you do not understand the computer configuration. There is no comparison between an original computer and an assembled computer.
Is it better to use an original computer or an assembled computer?
Which one is better, assembled computer or original computer? Hello dear, assembled computer is better 1. The advantage of original computer over assembled computer is that the stability is higher than that of assembled machine, and it has good brand guarantee and high-quality after-sales service. These are beyond the reach of assembling a computer.
2. The advantage of assembling a computer is that it has good upgrade space. In the later stages, you can upgrade the hardware according to your own needs.
For the same price, the assembled machine is more cost-effective than the original machine, and an accessory can be upgraded individually when needed.
3. Therefore, compared with the original machine, it is recommended to buy an assembled machine, but if you do not understand the computer configuration. There is no comparison between an original computer and an assembled computer.
The above is the detailed content of Is it better to have a computer assembled or buy an all-in-one computer?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

After turning on the laptop, the screen goes black and there is nothing on the desktop. There is no icon, only a mouse arrow... Damage to the picture tube or line output circuit. Failure of the picture tube or line output circuit will also cause a black screen without raster when the monitor is powered on. It is also the main cause of a black screen after the notebook is turned on. Sometimes the inability to boot is caused by a short circuit in some components, such as external USB devices, keyboards, mice, or power adapters. Try unplugging these devices and booting with only the battery installed to see if you can enter the BIOS. some type of. A black screen may occur when the computer starts up because the motherboard, monitor and graphics card in the computer are damaged, or the computer configuration is too old. This phenomenon may also occur. Most of the reasons are caused by process errors.

What to do if your Lenovo laptop has a black screen 1. When your Lenovo laptop has a black screen problem, you can try the following solutions: Check the power adapter and battery: Make sure the power adapter is connected properly and the battery is not exhausted. Try removing the battery and relying solely on the power adapter for power, then try starting again. 2. The reason and solution for the black screen of Lenovo laptop that cannot be turned on: The motherboard is not powered on. 3. The Lenovo laptop’s power-on button is on but the screen is black. If you encounter the situation where the Lenovo laptop’s power-on button is on but the screen is black, you can remove the battery on the back of the laptop, connect the computer to the power adapter only, and try to power it on once. If it boots normally, the battery is in contact. Caused by defective or battery failure. 4. The first reason is that the laptop’s power adapter is damaged and cannot be connected.

Can a computer log in to two WeChat IDs? 1. A computer can log in to two WeChat IDs. You can use the web version and PC version to log in. The operation method is as follows. Equipment: Lenovo computer System: Windows 10 Software: Google Chrome, WeChat version 51 First open the browser, then search on Baidu and click to enter. 2. You can log in to two WeChat IDs on your computer. First download the PC version of WeChat and install it. Find the "WeChat" shortcut icon on the desktop, right-click to display the "Menu", and select the last "Properties" option. 3. The computer can log in to two WeChat IDs. Take the Windows 7 operating system and WeChat version 0.0.47 as an example. 4. Later, WeChat became available on the computer, and many friends found that they could only log in to one WeChat account on their computer, which was very uncomfortable.

How to connect a Huawei phone to a computer via USB to access the Internet. First, we open the phone settings and search for "HDB". Then we click to open "Mobile Network Sharing" in More. Then we can click to open "USB Sharing Network" in the pop-up window. Summary First, connect the Huawei mobile phone to the computer through the data cable. Open "Settings" on your phone and enter the settings interface. Click "Personal Hotspot", select "USB tethering" and click the switch button at the back to turn it on. First click "Settings About Phone", then click "Version Number" 7 times in succession. You will be prompted to enter developer mode. Then return to the "Settings" list, "Developer Options" will appear, then click to enter "Developer Options", turn on the "USB Debugging" switch, and click

How to enter the BIOS settings of the computer. The method to enter the BIOS settings of the computer is: press the F2 key when the computer is turned on. The specific operation process is as follows: Find the power button on the computer keyboard and press it to turn on the computer. Then click to enter the boot program and load the boot animation. After that, find the F2 key on the keyboard and press the F2 key. You can enter the BIOS interface by pressing the DELETE key or the F1F2 key when turning on the computer power. Taking a Lenovo computer as an example, the operation method is as follows: When turning on the computer power, press and hold the F2 key on the Lenovo computer. At this time, you can see on the computer screen that you have entered the BIOS interface, and all you can see are English letters. There will be a screen prompt shortly after booting, then press F2 as prompted.

How to turn off the laptop screen and enter the computer, select the start icon in the lower left corner. Find and click to enter the settings option. In the settings interface, select the first one and go to system options. Click to enter the power and sleep options, then turn on the sleep screen and set the time. Question 1: How to turn off the screen on a laptop? Right-click the power icon in the lower right corner of the screen, and then select "Power Options" to enter the power options setting window. (The settings window can also be opened through "Control Panel → Power Options"), and then click "Choose when to turn off the display." Which key on the computer is to pause the screen: The shortcut key to pause the computer screen is "Win+L". When pressed, the computer will pause the screen. How to turn off the screen of Lenovo notebook thinkpad 1. The shortcut key to turn off the computer screen is to press windows at the same time.

How to set the bios password of Lenovo computer 1. First, we press f2 to enter the bios and switch to the security menu item. Then we use the up and down arrow keys to select the password option and press the Enter key to enter. Disabled means that the bios super administrator password is not currently set. If enabled, it means that the bios password has been set. 2. The first step is to enter the bios interface. After booting, press F12 immediately to enter the bios startup interface. In this computer information menu bar, you can see main hardware information such as computer model, BIOS version, CPU, memory, hard disk, optical drive, etc. Step 2: Press the right arrow key → on the keyboard to enter the hardware configuration settings. 3. Insert the USB flash drive into the computer, and then

Lenovo Savior is a very powerful laptop. This computer is equipped with two graphics processors. Many players switch to independent graphics card mode in order to have better performance when playing games. So how do they switch? Users can directly open Lenovo Computer Manager to set up. Let this site carefully introduce to users the switching method of Lenovo Savior’s independent graphics mode. How to switch the Lenovo Savior independent graphics mode. To switch the graphics card mode, you must restart the computer after each switch under the system. 1. Lenovo Computer Manager: Open Lenovo Computer Manager (switch to game mode in the upper right corner) → select the graphics card mode → you can perform mixed mode (dual graphics card switching) and independent graphics mode (direct graphics card connection). 2.Leno
