Computer Tutorials
Troubleshooting
The power supply is normal, but the motherboard is not receiving power and the power supply fan is not spinning. What is going on?
The power supply is normal, but the motherboard is not receiving power and the power supply fan is not spinning. What is going on?
php editor Xigua pointed out that when the power supply is normal but the motherboard does not receive power and the power fan does not spin, it may be caused by a power line failure, a motherboard failure, a loose power interface, etc. Solutions include checking the power line, replacing the motherboard, replugging the power interface, etc. If the problem is still not resolved, it is recommended to seek professional maintenance help to ensure the normal operation of the device.
The power supply is normal, but the motherboard is not powered and the power supply fan is not spinning. What is going on?
The power supply is normal, but the motherboard is not powered on. The faulty part is usually the motherboard.
1. To determine whether it is a power problem, first unplug all the cables connected to the motherboard.
Find a paper clip.
Find a set of 24-pin (some are 20-pin) cables on the power supply, and find the green wire and the black wire. There is only one green wire and there are several black wires. Choose one close to the green wire. Just use any of the black ones!
Insert one end of the U-shaped paper clip into the green hole, and the other end into any black wire hole next to the green wire.
After inserting the paper clip, you can now connect the power cord and start powering on.
If the fan of the power supply is spinning at this time, it is basically possible to determine that there is no problem with the power supply.
If the fan of the power supply does not rotate, you can basically judge that there is a problem with the power supply and you need to replace the power supply and test it.
2. After detecting that the power supply is normal, use the power supply and the motherboard to turn on the computer separately. Use a screwdriver to short-circuit the power SW pin on the motherboard.
At this time, the motherboard is powered on and the power supply fan will rotate. Then, Add memory, graphics card, hard disk, and connecting cables at one time until the fault recurs and you can find out the faulty part that caused the motherboard to not power on. If the motherboard still does not power on, then the faulty part is the mainboard.
How to solve the problem when the fan socket of the computer power circuit board is out of power?
You obviously don’t have power supply, check the reason first, plug in the power supply first
Use tweezers to connect it, short-circuit it and see if the power fan rotates
Check If you turn the green one and one of the three black ones
, it proves that there is no problem with the power supply. Then plug in all the sockets and connect the motherboard power jumper with tweezers to see if it can start. If it can, it means that the hardware is basically faulty. The problem may be that the chassis button circuit is blocked.
If it does not transfer, it should be a motherboard problem or other circuit problem, which requires further inspection. At this time, you need to gradually replace other accessories and troubleshoot the problem.
Does the CPU fan stop after turning on the motherboard?
1. If you encounter the problem that the fan stops after spinning, you should check the memory module. The detection method is: unplug one root to test the boot status. If it can boot but won't restart, then it's a memory problem. If not, it's not a memory problem.
2. If there is no problem with the memory test, but the CPU fan still cannot be turned on or the CPU fan still stops and turns off, check whether the host power supply is good. The detection method is the replacement method. Use another new power supply to test. If it can be turned on, , if it restarts automatically, it is basically a power supply problem, no need to doubt it.
3. If it still cannot be solved, consider checking the motherboard problem. It may be that the motherboard has protection enabled.
4. If it can be turned on and then automatically restarts, it is likely to be a system problem. However, this problem is relatively rare and usually occurs on old computers. You can try reinstalling the system to see if it can work. solve.
The motherboard is powered on but does not light up, the fan does not spin and there is no movement. What is the problem?
The power supply is normal, but the motherboard is not powered on. The faulty part is usually the motherboard.
1. To determine whether it is a power problem, first unplug all the cables connected to the motherboard. Find a paper clip. Find a set of 24-pin (some are 20-pin) cables on the power supply, and find the green wire and the black wire. There is only one green wire and there are several black wires. Choose the black ones next to the green wire. Any one will do! Insert one end of the U-shaped paper clip into the green hole, and the other end into any black line hole next to the green line. After inserting the paper clip, you can now connect the power cord and start powering on. If the fan of the power supply is spinning at this time, it is basically possible to determine that there is no problem with the power supply. If the fan of the power supply does not rotate, it can basically be determined that there is a problem with the power supply, and the power supply needs to be replaced and tested.
2. After detecting that the power supply is normal, use the power supply and the motherboard to turn on the computer separately. Use a screwdriver to short-circuit the power SW pin on the motherboard. At this time, the motherboard is powered on and the power supply fan will rotate. Then add memory and graphics card at one time. , hard disk, connecting cable, until the fault recurs, you can find out the faulty part that caused the motherboard to not power on. If the motherboard still does not power on, then the faulty part is the mainboard.
The graphics card fan does not spin when the motherboard is powered on?
It may be caused by poor contact between the graphics card and the PCI-E slot of the motherboard. If there is no response at startup, check whether the graphics card is properly powered. If the graphics card is not powered properly or the power supply is insufficient, the graphics card cannot operate normally. Use the integrated graphics alone to see if it can be turned on normally. Uninstall the graphics card, clean the dust, and then install it to see if it can be used normally, or use a replacement. If you try to use the graphics card on other motherboards, the problem will be the same and troubleshoot the hardware problem.
The above is the detailed content of The power supply is normal, but the motherboard is not receiving power and the power supply fan is not spinning. What is going on?. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
Specific steps for expanding the C drive using the partition tool diskgenius
May 08, 2024 pm 08:04 PM
First, download and install the [DiskGenius] tool on your computer, then open the tool, then click [File Menu] at the top, and then click [Restart the system and run the DiskGenius software], as shown in the figure. Then click [OK] in the pop-up prompt box, as shown in the figure. After that, the computer will restart and then enter the Diskgen hard disk partition interface. At this time, if we want to expand the C drive, we only need to right-click the D drive next to the logical partition and click "Adjust Partition Size" in the pop-up menu, as shown in the figure shown. Then you need to adjust the size of the D drive partition. For example, the current capacity of the D drive is 14.99GB, as shown in the figure below. At this time, we can adjust the installment of the D drive. For example, if we want to allocate 1.03GB to the C drive, we only need to allocate 1.03GB to the C drive.
The computer fan suddenly makes a loud sound and then the screen goes black
Apr 18, 2024 pm 07:10 PM
Why does the laptop have a black screen when it starts up and the fan keeps beeping? 1. When the computer starts up and the screen goes black but the fan spins, it is usually caused by poor contact between the monitor cable and memory and other hardware. You can disassemble the computer to check each component, remove dust and reinstall it. 2. Power supply problem: The battery is exhausted or the power adapter fails, which may cause the computer to fail to boot. Try replacing the power adapter or rechargeable battery to see if the computer can boot normally. Hardware failure: If there is a problem with the computer hardware device, it may not start properly. 3. The fault may be caused by a problem with the hard disk, or the computer may not have good heat dissipation. 4. The fan keeps beeping after the computer is turned on, but the monitor screen is black and unresponsive. Determine what the problem is based on the sound of the buzzer when the computer is turned on. The long beep is that the graphics card is not connected properly. first check
How to skip the network installation system in win11 24h2? The latest version of win11 24h2 skips the online installation tutorial
May 03, 2024 pm 09:13 PM
The 24h2 version is the latest operating system released by Microsoft. I believe many users have seen some download packages on the Internet. So how can win1124h2 skip the Internet installation system? Let this site carefully introduce the latest version of win1124h2 to users. Skip the Internet installation tutorial. The latest version of win1124h2 skips the online installation tutorial. Method 1: Skip by modifying the registry. 1. Press the Shift+F10 keys to bring up the cmd command prompt window and enter the following command: regedit and press Enter to quickly open the registry editor. If users feel that the 24h2 version is not used to the operation, they can click on the 23h2 version below to reinstall it. Win1123H22263
Tutorial on assembling a computer and installing a system? How to install win11 system when assembling a computer?
Apr 27, 2024 pm 03:38 PM
Tutorial on assembling a computer and installing a system? Nowadays, the system installation for assembling computers is very simple and convenient, and only requires a CD. First enter the bios settings, set the computer to boot first with the CD-ROM drive, then restart the computer and load the system CD into the CD-ROM drive. The CD will automatically enter the installation state. At this time, you only need to manually repartition the partitions, and the rest will be completed automatically. How to install win11 system when assembling a computer? 1. First, we need to download a win11 image file from this site before installing it. 2. The win11 image file has undergone a large number of professional tests to ensure stable installation and smooth operation. 3. After the download is completed, load the folder in the download path and run the "windowssetup" process in it.
How to set up the Chinese version of navicat
Apr 06, 2024 am 08:15 AM
Yes, just follow these steps: Download and install the Chinese version of Navicat. Run Navicat and select Tools > Preferences. In the Preferences dialog box, select the Appearance tab. In the Language drop-down list, select Simplified Chinese or Traditional Chinese. Click OK to save settings and restart Navicat.
What is the appropriate temperature for playing Apex computer?
May 06, 2024 am 09:31 AM
What is the appropriate temperature for playing Apex computer? 80 degrees is suitable. When running large-scale games or playing high-definition videos, the temperature can reach about 80°C. Generally, it is considered normal to not exceed 90°C under high load. Graphics cards are generally the hardware that generates the most heat among computer hardware. Generally, it is normal for the temperature of a graphics card to be around 30℃-80℃. Due to external temperature, it is normal for most graphics card temperatures to be between 50℃-85℃ in summer. range, if you are running large-scale 3D games or playing high-definition videos for a long time, the highest temperature may reach about 95°C. This temperature range will affect the life of the computer hardware. No matter how high the temperature is, you must consider strengthening heat dissipation and cleaning dust. How to play with the apex handle and the computer ? Method/step-by-step reading: 1. Use wired or wireless
What to do if you forget your Apple ID password? Detailed explanation: How to reset the password on your Apple phone
Mar 29, 2024 am 10:46 AM
What should I do if I forget my Apple ID password? With the development of the information age, people have registered many personal accounts online, and the number of passwords corresponding to each account has also increased, which is very easy to confuse. Recently, a friend forgot his Apple ID password and doesn't know how to retrieve it. Below, Zhao Wenting will teach you how to retrieve your Apple ID password. Tools/Materials System version: iOS15.6 Brand model: iphone11 Method/step: Method one: Reset ID password 1. If your iPhone can be used normally, but you just forgot the password for logged in appleid, you only need to log in to appleid Click [Log Out] at the login page, then click [Forgot Password], enter the iPhone lock screen password to reset the iPhone
Why does Huawei mobile phone frequently restart automatically?
Apr 20, 2024 pm 09:22 PM
There are three reasons why Huawei mobile phones frequently automatically restart, including abnormal mobile phone system software, short circuit of the mobile phone's power button, and mobile phone motherboard problems. In order to solve these problems, we can try to restart the phone or restore factory settings. If these methods cannot solve the problem, we need to send the phone to a professional mobile phone repair shop for repair. The following are more detailed explanations and suggestions: 1. The mobile phone system software is abnormal. Some incompatible software is installed on the phone or the phone memory is too full, causing the phone to automatically turn on or off or restart. We need to delete some files in the phone or directly restore the phone to factory settings to solve the problem. If the phone can no longer enter the system, we can try to turn it off first, then press and hold the volume up button + power button, and wait for the phone to enter recovery.
