How to turn off ACPI in ASUS motherboard BIOS?
php Editor Xinyi introduced that there is an ACPI option in the BIOS of the ASUS motherboard, which controls the communication and coordination between the operating system and hardware devices. Sometimes, in order to solve some compatibility and stability issues, we may need to turn off ACPI. Turning off ACPI can be done in the BIOS settings. The specific steps are as follows: First, restart the computer and enter the BIOS interface; then, find the "Advanced" or "Advanced" option in the BIOS interface; then, find "ACPI Configuration" or "ACPI Configuration" in the advanced option. "ACPI Settings"; finally, set the ACPI option to "Disabled" or "Off". After completing the above steps, save the settings and restart the computer, ACPI will be successfully turned off. Please note that turning off ACPI may cause some functionality to become unavailable or unstable, so make sure you understand the risks and consequences before proceeding.
How to turn off ACPI in the BIOS of ASUS motherboard?
①Press the del key after booting to enter the BIOS,
②Use the mouse to find the Advanced bios featres standard setting options, and press Enter to find all ACPI word options,
③Find Advanced Configuration and Power Interface (ACPI Function), change Enable to Disable to turn it off.
How to solve acpibioserror on ASUS motherboard?
ACPI BIOS Error may be caused by some hardware or software problems with your computer. The following are some possible solutions:
1. Update BIOS: You can download the latest BIOS from the official website of ASUS motherboard and update it. Updating the BIOS may fix ACPI BIOS Error.
2. Check the hardware: Sometimes ACPI BIOS Error can be caused by a problem with a certain hardware. You can check the hard drive, memory, graphics card and other hardware. If there is a problem with these hardware, it may cause an ACPI BIOS Error.
3. Check the driver: Wrong driver may cause ACPI BIOS Error. You can uninstall recently installed drivers, or update drivers.
4. Reset BIOS: If ACPI BIOS Error still exists, you can try to reset BIOS settings, sometimes this can fix some problems.
5. Contact technical support: If you cannot solve the ACPI BIOS Error, you can contact the reputable ASUS motherboard technical support for help.
How to turn off ACPI in the BIOS of ASUS motherboard?
The steps to turn off ACPI in BIOS are as follows:
Step one: Press the del button to enter the motherboard BIOS.
In the second step, use the keyboard to find the Advanced bios featres standard settings option and press Enter to confirm.
Step 3: Finally find all the ACPI word options, change the following option parameters to Disablad, and F10 to save.
What does ASUS motherboard aa mean?
AA indicates that the boot process ends and enters ACPI mode. This ACPI mode is also called the Advanced Program Interrupt Controller. It was invented by IBM to solve the problem of insufficient IRQ. The motherboard runs in ACPI mode by default. If some devices run in shared IRQ mode, If there is a problem, you can go to the bios to turn off the ACPI mode and run in the CPI mode (unless you encounter a clear problem, it is not recommended to change it casually). At this time, the startup completion code will display AC. If you don’t understand, don’t worry. It means that this motherboard displays AA. Normal start
The above is the detailed content of How to turn off ACPI in ASUS motherboard BIOS?. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
What should I do if the Razer mouse driver cannot recognize the mouse?
May 06, 2024 pm 11:36 PM
Razer mouse drivers not recognized can be resolved by following these steps: check hardware connections, update drivers, reinstall drivers, check Windows settings, check for third-party software conflicts, run System File Checker (SFC) and reset Razer Snake Synapse. If the problem persists, the mouse hardware may be faulty, please contact Razer Support.
How to enter bios on hp motherboard
May 04, 2024 pm 09:01 PM
How to set up the U disk boot in the HP notebook bios (how to enter the HP computer bios) and then insert the U disk to be booted first into the USB port of the notebook. If you want to install the system, the system program must have been prepared in the U disk. First, open the laptop. Make sure the laptop is turned off. Setting the bios must be done with the computer turned off. Then insert the U disk that you want to boot first into the USB port of the notebook. If you want to install the system, the prerequisite is that the system program has been prepared in the U disk. Take the HP ProDesk400G5SFF desktop computer as an example. Set the BIOS disk startup method: First, restart the computer and wait for the startup screen to appear. There are two ways to set up USB disk startup on HP notebooks. One is to directly press the shortcut key to select
Solve the problem of being unable to access the Internet even though the broadband is connected (troubleshooting)
May 05, 2024 pm 06:01 PM
The Internet has become an indispensable part of people's lives in today's information age. But we can't get online, and sometimes we encounter some troubles. However, for example, the broadband is already connected. And take corresponding solution measures, we need to troubleshoot the problem step by step to restore the network connection in this case. Confirm the device connection status: Whether the mobile phone and other devices have been correctly connected to the broadband network, check the computer to ensure that the wireless network or wired network connection is normal. 2. Restart the broadband device: Reset the device and re-establish the connection, wait a few minutes and then turn it back on again. Try turning off the broadband router or modem. 3. Check the broadband account number and password: To avoid being unable to access the Internet due to incorrect account or password, make sure the broadband account number and password entered are correct. 4. Check D
How to enter bios after assembling a computer? How to enter bios when assembling a computer?
May 07, 2024 am 09:13 AM
How to enter bios after assembling a computer? Before entering the BIOS, you need to make sure that the computer is completely shut down and powered off. Here are several common ways to enter the BIOS: 1. Use shortcut keys: Most computer manufacturers will display a prompt message at startup telling you which key to press to enter the BIOS settings. Usually the F2, F10, F12 or Delete key. After pressing the appropriate keys, you should be able to see a screen with information about your computer's hardware and BIOS settings. 2. Use the button on the motherboard: Some computer motherboards have a dedicated button for entering BIOS settings. This button is usually labeled "BIOS" or "UEFI". After pressing the button you should be able to see
MSI motherboard boot logo
May 08, 2024 pm 02:20 PM
How to cancel the MSI motherboard icon when booting 1. Press the DEL key when booting to enter the BIOS. Generally, in the "Advanced Features" item, you can find the words MSI motherboard LOGO screen. Select DISABLED, save and exit. There will no longer be this MSI motherboard LOGO screen when you turn on the computer in the future. MSI motherboard refers to the motherboard brand developed by MSI (MSI Technology Company). 2. The logo displayed when the computer is turned on is basically that of the motherboard manufacturer. You can set QUICKPOST to DISENABLE in the BIOS, so that the logo will generally no longer be displayed. It will display computer configuration-related information and give you more details. 3. First, teach you how to flash the BIOS in Windows environment. First: Go online
What to do if win11 bluetooth cannot be used_win11 bluetooth cannot be connected how to deal with it
May 08, 2024 am 10:37 AM
1. First, we click the search button in the taskbar below, search and enter [Device Manager]. 2. Then find our Bluetooth device in the device manager, right-click to select it, and click [Update Driver]. 3. If the Bluetooth device cannot be found in the device manager, then we can download Master Lu and update the driver in it. Method 2: 1. First, we enter [Settings] through the start menu. 2. Find the [devices] device in the setting interface. 3. Then click the [Bluetooth] option, and then set the switch below to [On].
How to connect Redmi Note13RPro to the computer?
May 09, 2024 pm 06:52 PM
The phone Redmi Note13RPro has been very popular recently. Many consumers have purchased this phone. However, many users are using this phone for the first time, so they don’t know how to connect the Redmi Note13RPro to the computer. In this regard, the editor is here to explain to you Detailed tutorial introduction is provided. How to connect Redmi Note13RPro to the computer? 1. Use a USB data cable to connect the Redmi phone to the USB interface of the computer. 2. Open the phone settings, click Options, and turn on USB debugging. 3. Open the device manager on your computer and find the mobile device option. 4. Right-click the mobile device, select Update Driver, and then select Automatically search for updated drivers. 5. If the computer does not automatically search for the driver,
What should I do if League of Legends does not support DX9? How to upgrade to DX11 when playing League of Legends on PC
May 06, 2024 pm 12:07 PM
Recently, "League of Legends" ushered in the 14.9 version update. After the update, "League of Legends" no longer supports DirectX9 in all regions around the world. In other words, if the user's computer graphics card can only support DirectX9, then the graphics card or device must be replaced. If there is no problem with the graphics card, you can update the driver. You can also update and upgrade the system, and the DirectX version will also be updated accordingly. It is understood that DirectX is a series of application development interfaces (APIs for short) developed by Microsoft. This API allows various applications to interact with your computer's hardware (including but not limited to mouse, keyboard, graphics card, etc.). Many applications use DirectX, but Direct
