How to connect a Mac to another computer's hard drive?

Foreword: Many friends have asked questions about connecting the hard drive to Mac and other computers. This site will give you a detailed answer for your reference. I hope it will be helpful to you! Let’s take a look!

After you finish the mac system on an Apple computer, remove the hard drive and install it on another Apple computer...

1. In most cases, it cannot be used. If Computer models are also available. For example, driver problems and hardware driver problems cause the computer to fail to boot. It is better to install the system directly. A computer can have multiple hard drives installed, and only one hard drive can be used to start the system.

2. No, after all, the virtual machine can only be used in a special environment and is not a system. To install a MAC system, you can use Black Apple. The system installation is easy, but the difficulty lies in the driver. It took me a week to install the WIN MAC dual system on my laptop back then.

3. In response to this problem, the editor will tell you how to replace the hard drive of Apple Mac computer. The specific method is as follows: First, open the back cover of the computer. Remove the previous hard drive. Remove the screws from the hard drive. Install to new hard drive.

How to make the mobile hard drive work on both Mac and Windows

1. Find and open "Disk Utility" in "LaunchPad", and then You can see several partitions of the mobile hard disk in "Disk Utility". After selecting the partition, select the "Erase" option button. You can see that the partition is formatted as NTFS. NTFS-formatted partitions are read-only on Macbook.

2. It is recommended that you use ExFAT format mobile hard disk, or NTFS format mobile hard disk NTFS For Mac software to achieve compatibility. The detailed explanation is as follows: First of all, the hard disk compatibility problem is a format problem.

3. Yes, both systems can read and write FAT32 format disks, but HFS can only be read by Apple. If the system is below OS X 9, HFS Mounter needs to be installed on the Mac. Access HFS-formatted mobile hard drives through this software. Mobile hard drives in HFS format can be used in Windows systems.

4. When you first connect the mobile hard disk to the Mac computer, after the loading is completed, the disk of the mobile hard disk will be displayed on the desktop, as shown in the figure below. In addition, under Devices in the Finder window, you can also see the currently loaded removable disk, as shown in the figure. Use USB.

How to connect to a shared disk or folder on a remote MAC

1. First open the Windows system computer, right-click the shared file, and select "Properties". Then click the "Share" option in the sharing in the operation interface of the folder properties. Then select the settings you want to share in the file sharing operation window and click the "Share" option.

2. Turn on the computer and click the Go option above. Find the Connect Server option in the open Go menu and click to enter. In the jump connection server interface, select the server address of the shared file. Then enter the account password. In the jump interface, select the folder you need to access.

3. Step 2. Share folders on Mac. After Windows can successfully access file sharing on Mac, let’s try sharing a file on Mac. Select any folder here, right-click and click the "Show Profile" option.

4. The following are the steps to set up: To access Windows shared files on an Apple Mac computer, first confirm that sharing is turned on under the Windows system. And the LAN between the two computers is connected. For Apple MAC system, click on the desktop. Open the top menu "Go". Select "Connect to Server" at the bottom of the menu.

5. Required conditions: Apple computers and Windows computers need to be in the same LAN. The steps for the Windows system to access shared files on the Mac system are as follows: First, set up sharing on the Apple computer, and click the file in the upper left corner with the mouse. Click on the new "Fangda" window in the pop-up menu.

How is the mobile hard disk compatible with PC and MAC?

Find and open "Disk Utility" in "LaunchPad", and you can see several partitions of the mobile hard disk in "Disk Utility". After selecting a partition, select the "Erase" option button. You can see that the format of the partition is NTFS. On Macbook, NTFS formatted partitions are only readable.

It is recommended that you use ExFAT format mobile hard disk, or NTFS format mobile hard disk NTFS For Mac software to achieve compatibility. The detailed explanation is as follows: First of all, the hard disk compatibility problem is a format problem.

Plug one end of the two USB heads into the USB interface of the computer, and the other end into the hard drive. Apple computers can use ordinary mobile hard drives. The specific method is as follows: Before using the mobile hard drive, first open the launch pad. Then install the mounty and open it. Then take out the mobile hard drive data cable and plug it into MacUSB.

Click the Start menu button in the lower left corner of the system desktop. Click [This PC] in the interface and open it. Find the mobile hard drive, right-click the mouse, and click [Format] in the menu. Select the [exFAT] format under File System.

In the mac system, "Disk Utility" can be found in "Others" in the "Launchpad" of the toolbar.

Can the hard drive of a macbook be operated without being connected to other computers?

If the computer is indeed broken and cannot be repaired, usually the hard drive is still good. If you remove it and add a removable disk, it can be used as a removable disk. If you still have a laptop hard drive, and the hard drive is smaller than this, you can also directly replace the small hard drive with a new one. It should be noted that it can be used directly on Apple computers.

There are two ways to install Windows 10 system on Mac computers. The first is to use virtualization software, such as Parallels 10. The second is to use Boot Camp to install. Next we will see which one is more suitable for you.

It can support MAC system, but cannot support it. Mobile hard drives that support the MAC system can be read directly. Those that do not support the system require software installation and system settings to complete the link. The Windows To Go installer can create a boot disk in a virtual machine or other computer with Windows installed. It can support 1/10.

There is also a BAT that allows win to recognize the Apple disk, but its function is somewhat inferior to the former. Apple systems also have a similar program that can read and write NTFS disks. Basically, it is best not to use other system type partitions for daily operations under different systems. In addition, it is said that the exFAT used for mobile hard disks can be read and written under both systems.

As long as the hard drive is not broken, it is ok. The prerequisite is that there must be a hard drive box. Remove the hard drive and insert it into the hard drive box and connect it to the computer USB interface. At this time, all your files will be displayed. It is recommended that you buy a hard drive enclosure that is compatible with both desktop and laptop hard drives. Don't worry about a few dozen dollars.

How to make a mobile hard drive universal for mac/pc

1. You can use the following two methods to make the mobile hard drive usable on both Mac and Windows. The first one: Format (data will be erased) You can choose to format the hard drive into a format that both Mac and Windows computers support reading and writing. Such as exfat, but it should be noted that exfat is not as stable as NTFS.

2. Apple computers can use ordinary mobile hard disks. The specific method is as follows: Before using the mobile hard disk, open the launcher first. Then install the mounty and open it. Then take out the mobile hard drive data cable and plug it into MacUSB. Then wait for the hard disk light to turn on, as shown below.

3. Click the Start menu button in the lower left corner of the system desktop. Click [This PC] in the interface and open it. Find the mobile hard drive, right-click the mouse, and click [Format] in the menu. Select the [exFAT] format under File System.

4. In the mac system, you can find "Disk Utility" in "Others" in the "Launchpad" of the toolbar.

Conclusion: The above is all the content about connecting the hard drive to mac and other computers compiled by this site. Thank you for taking the time to read the content of this site. I hope it will be helpful to you. Don’t forget to learn more related content. Find it on this site.

The above is the detailed content of How to connect a Mac to another computer's hard drive?. For more information, please follow other related articles on the PHP Chinese website!