What is the problem with the flashing yellow light of g3800 printer?
g3800 printer yellow light flashing problem causes and solutions: 1. The yellow light flashes 2 times, indicating that there is no paper in the paper box or the paper is wrongly fed. You can put the paper back into the paper box, and then press Resume button; 2. The yellow light flashes 3 times, indicating that there is a paper jam problem. You need to take out the paper and press the Resume button; 3. The yellow light flashes 4 times, indicating that there is no ink problem. You need to replace the ink tank or press the RESUME button; 4. If the yellow light flashes 5 times, it means that the print head is not installed or installed improperly. You need to install the print head correctly or reinstall the print head, shut down the machine, and then restart the machine.
#The operating environment of this tutorial: Windows 10 system, Dell G3 computer.
What is the problem with the yellow light flashing on the g3800 printer?
Canon g3800 printer’s yellow light keeps flashing, indicating that the printer is not functioning properly.
If only the yellow light flashes, it means that the automatic alignment of the print head fails. You can press the Resume/Cancel button and the print head will no longer be automatically aligned.
If the yellow light and green light flash alternately, it means Carriage lift mechanism error
You can only contact the maintenance department for repair of this error. The fault may occur in Paper feed unit, logic board, carriage lift sensor.
Yellow light flashes 2 times: No paper (ASF)/no CD-R disc/no paper in the paper tray. Put the paper on the ASF/put the CD-R disc/put the paper in the paper tray, then press the Resume button
The yellow light flashes 3 times: paper jam/paper jam in the lower part/paper jam in the rear part/ The front door flap is closed. Take out the paper and press the Resume button
The yellow light flashes 4 times: no ink. Replace the ink tank or press the RESUME button
The yellow light flashes 5 times: the print head is not installed/the print head is not installed properly. Correctly install the print head or reinstall the print head, shut down the machine, and then restart it
The yellow light flashes 6 times: the door inside is opened (or during printing)/CD- RThe disc rack is closed (when printing a CD-R). After closing the inner door/opening the CD-R rack, press the RESUME button.
Yellow light flashes 7 times: No CD-R or DVD-R. Put the CD-R or DVD-R on the disc rack, put it into the printing channel, and press the RESUME button.
Yellow light flashes 8 times: Waste ink warning error 95% is close to full. Press the RESUME key to cancel and exit this error, then replace the ink absorbing sponge and clear the waste ink amount
The yellow light flashes 9 times: the digital camera or camcorder does not support direct printing. Unplug the connection, press the RESUME button, and then reconnect.
The yellow light flashes 10 times: Automatic double-sided printing cannot be performed (the size of the printing paper is not supported). Press the RESUME key to cancel and exit this error message and print again.
The yellow light flashes 11 times: Automatic correction of the print head fails/the front door is open. Press the RESUME button and re-confirm: the type and size of the printing paper, check whether the nozzle of the print head can print correctly, and ensure that the printing paper channel is smooth/close the front door
FAQ column!
The above is the detailed content of What is the problem with the flashing yellow light of g3800 printer?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

The new system win11 brings many optimizations and new features to users, but when connecting to a shared printer, you may encounter an error code 0x00000bc4, which causes the printer to be unable to connect and print. So how to solve the problem of shared printer 0x00000bc4? ? Let’s take a look at the following processing methods. Method 1. Printer sharing (same operating system): 1. All clients are located in the same network segment, such as 192.168.1.* (if the router IP is 192.168.1.1); 2. All clients are located in the same network segment. In the same workgroup, such as WORKGROUP; turn off password-protected sharing in WIN7: Open the Network and Sharing Center, select Change advanced sharing settings, and scroll down

If you encounter an error message when using your printer, such as the operation could not be completed (error 0x00000771), it may be because the printer has been disconnected. In this case, you can solve the problem through the following methods. In this article, we will discuss how to fix this issue on Windows 11/10 PC. The entire error message says: The operation could not be completed (error 0x0000771). The specified printer has been deleted. Fix 0x00000771 Printer Error on Windows PC To fix Printer Error the operation could not be completed (Error 0x0000771), the specified printer has been deleted on Windows 11/10 PC, follow this solution: Restart Print Spool

If you encounter the problem of insufficient printer memory when printing Excel worksheets or PowerPoint presentations, this article may be helpful to you. You may receive a similar error message stating that the printer does not have enough memory to print the page. However, there are some suggestions you can follow to resolve this issue. Why is printer memory unavailable when printing? Insufficient printer memory may cause a memory not available error. Sometimes it's because the printer driver settings are too low, but it can also be for other reasons. Large file size Printer driver Outdated or corrupt Interruption from installed add-ons Misconfiguration of printer settings This issue may also occur because of low memory settings on the Microsoft Windows printer driver. Repair printing

The computer prompts error code 0x00003e3 when connecting to the printer. In daily work and life, we often need to use a printer to print files. However, sometimes we may encounter some problems, such as the error code 0x00003e3 when the computer is connected to the printer. This error code usually indicates that there is some malfunction with the printer or a connection problem. In this article, we will introduce some ways to solve this problem. First, we can try to restart the computer and printer. Sometimes, this error code is just a temporary issue that may be resolved by restarting the device. We can turn off the computer and printer first, then wait for a while before restarting them. If this method does not solve the problem, we can try the following

Printers are equipment that we often use in our daily offices and lives. Occasionally, we may encounter the problem of long printing response delays, which is a headache. There are many reasons for this. First, check whether the printer is connected properly and make sure all the cables are plugged in tightly. Secondly, there may be too many tasks to be processed in the print queue. You can try clearing the print queue or restarting the printer. There may also be a problem with the printer driver. You can try updating the driver or reinstalling it. In addition, hardware failure inside the printer may also cause delays. In this case, you need to contact after-sales service.

Win10 system shared printer access denied (solution to the inability to connect to the shared printer) When using the Windows 10 operating system, sometimes we encounter the problem of shared printer access denied, that is, unable to connect to the shared printer. This problem may cause us to be unable to print files normally, causing inconvenience to our work and life. Here are some solutions to help you solve this problem. 1. Check the network connection: First, make sure your computer and the shared printer are connected to the same network. Check whether the network connection is normal and ensure that the network connection is stable. 2. Check sharing permissions: On the computer where the shared printer is located, open "Control Panel" and select "Devices and Printers". Right-click the shared printer and select "

If you are unable to print using the Snipping Tool in Windows 11/10, it may be caused by corrupted system files or driver issues. This article will provide you with solutions to this problem. Can't print from Snipping Tool in Windows 11/10 If you can't print from Snipping Tool in Windows 11/10, use these fixes: Restart PC Printer Clear print queue Update printer and graphics driver Fix or reset Snipping Tool Run SFC and DISM Scan uses PowerShell commands to uninstall and reinstall Snipping Tool. let us start. 1] Restart your PC and printer Restarting your PC and printer helps eliminate temporary glitches

According to news from this site on April 30, Lenovo Xiaoxin PandaPro Panda Printer Pro is now available on JD.com. This printer will go on sale on May 6. It supports black and white laser printing, has an optional two-color body, and has built-in learning resources. The initial price is 999. Yuan. Lenovo Xiaoxin Panda Printer Pro measures 350x275x141mm and is available in two color options: Xiling White and Qingcheng Gray. This printer supports 2.4GHz/5GHz dual-band Wi-Fi, USB wired and other connection methods. It can print with one click after being configured with the network, and can also achieve NFC one-touch printing. Xiaoxin Panda Printer Pro supports black and white laser printing and can print 22 pages per minute. In addition to printing functions, this model also supports copying and scanning functions, with a color scanning resolution of 4800d.