Which of tx and rx is sending and receiving?
tx means receive means receiving, rx means transmit means sending; the situation when receive receives packets from being turned on to now is the downlink traffic, and the situation when transmit is sending packets from being turned on to now is uplink traffic; In INTTERFACE, when we check the traffic of the WAN network card, rx is the downstream traffic and tx is the upstream traffic.
The operating environment of this tutorial: Windows 10 system, DELL G3 computer.
Which one is sending or receiving between tx and rx
tx and rx are rx is receive and tx is transmit. The status of receiving packets from when receive was turned on to now is downstream traffic. The situation in which Transmit sends packets from when it was turned on to now is upstream traffic.
When we check the traffic of the WAN network card in INTTERFACE, RX is the downstream traffic and TX is the upstream traffic. In SIMPLEQUEUES, when the destination address is the workstation IP and the network card is WAN, TX is the downstream traffic limit.
Expand knowledge
Upstream traffic calculation method
Downstream traffic is from the network If the number of bytes downloaded is GPRS billed by traffic, then the billed traffic = upstream traffic + downstream traffic. The upstream speed refers to the speed when uploading files. For example, when you put a movie on your computer into a network hard drive, it will There is an upload speed.
Download speed refers to the speed when downloading files. For example, when downloading a song, there will be a download speed. The corresponding relationship between downlink speed and download speed: the theoretical download speed corresponding to 512k/second is about 62.5KB/second, and the common speed is 50 to 60.5KB/second.
This is the download speed of 0.5M ADSL. The maximum downstream speed of 1.5M/S should reach 187.5KB/second, and the speed is normal between 150 and 180KB/second.
For more related knowledge, please visit the FAQ column!
The above is the detailed content of Which of tx and rx is sending and receiving?. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
my country's optical fiber giant YOFC acquires RFS's German and Suzhou companies to develop the international cable market
Apr 09, 2024 am 10:40 AM
According to news on April 9, YOFC Optical Fiber and Cable Co., Ltd. (hereinafter referred to as "YOFC") recently acquired the German and Suzhou companies of Radio Frequency Systems GmbH (hereinafter referred to as "RFS") and held a delivery ceremony. As a provider of optical fiber preforms, optical fibers, optical cables and comprehensive solutions, YOFC mainly produces and sells various standard specifications of optical fiber preforms, optical fibers and optical cables widely used in the communications industry, as well as various types of optical modules and special optical modules based on customer needs. Optical fibers, active optical cables, submarine cables, as well as radio frequency coaxial cables, accessories and other products. In recent years, we have vigorously expanded markets such as rail transit, base station cables and devices, and power cables. According to reports, the RFS German and Suzhou companies acquired in this transaction are engaged in activities including radio frequency cables.
What is the download speed of Gigabit fiber?
Dec 01, 2023 pm 02:50 PM
Gigabit fiber download speed is 1000Mbps, or 125MB/s. In actual use, due to the influence of control signals, network loss, line attenuation and other factors, the real download speed will be lower than the theoretical value. The actual download speed is about 110-117MB/s, which is about 880-936Mbps. If you use a wireless connection to measure the speed, the download speed will be affected by factors such as equipment, distance, channel, etc., and generally can only reach about 20-30% of the theoretical speed. Therefore, the normal range of gigabit broadband download speed is 20-125MB/s.
What is the difference between optical fiber to the home and network cable to the home?
Oct 21, 2022 pm 12:56 PM
Differences: 1. Fiber-to-the-home means that broadband operators directly connect fiber optic cables to users' homes, while network cable-to-home connects a commonly used Category 5 network cable to users' homes. 2. Optical fiber to the home requires the use of a special optical modem provided by the operator to receive optical signals and then output the network signal through the optical modem; while the network cable to the home can be directly plugged into the computer's network card to access the Internet, or it can be connected to the switch through a network cable and router to access the Internet. 3. The bandwidth of optical fiber is exclusive. For example, 100M optical fiber broadband, then it is 100M; while the network cable to the home shares one optical fiber for the entire unit.
Huawei strongly supports the introduction of optical fiber and the withdrawal of copper: wiring costs are reduced by 80%, and primary wiring will not be outdated for 30 years.
Jul 04, 2024 am 09:55 AM
According to news on July 3, at the Huawei Africa Fully Connected Conference 2024, Chen Banghua, President of Huawei’s Optical Product Line, introduced the three major trends in the optical industry in the intelligent era: “Optical Advances and Copper Retreats”, “Optical Advances and Electrical Retreats” and “Light Advances and Human Retreats”. ". Among them, in the field of "optical advancement and copper exit", Chen Banghua said that home broadband networks need to be fully fiber-optic and extend the ultimate broadband experience to every room through FTTR to achieve a ubiquitous Gigabit or even 10 Gigabit ultimate bandwidth experience. "Light advances and copper retreats" is also moving from families to parks. In the era of 10 Gigabit campus, Wi-Fi7 is indispensable. Wi-Fi7 rate support from 3Gbps to 1
What is the difference between single mode and multimode fiber optics?
Aug 21, 2023 pm 03:02 PM
The differences between single-mode and multi-mode optical fibers are in terms of core diameter, transmission loss, transmission distance, transmission bandwidth and application scenarios. Detailed introduction: 1. Core diameter, the core diameter of single-mode fiber is very small, usually 8-10 microns, while the core diameter of multi-mode fiber is larger, usually 50-62.5 microns; 2. Transmission loss, single-mode fiber The core diameter is small, and there is only one transmission mode when the optical signal propagates, so the attenuation of the optical signal during the transmission process is small, and the transmission loss is also low. The core diameter of the multimode fiber is large, and the optical signal has multiple transmission modes, etc. .
How many megabytes of optical fiber is the network?
Oct 27, 2022 pm 02:33 PM
Optical fiber does not specify the number of megabytes of broadband, but only provides high-speed bandwidth capabilities such as 10Mbps, 100Mbps, and 1000Mbps. Fiber-optic broadband only propagates signals through optical fibers, and "optical cats" are installed at both ends of the optical fibers for signal conversion.
What are the characteristics of optical fiber?
Jun 02, 2023 pm 03:20 PM
The characteristics of optical fiber are: 1. Long transmission distance, the optical fiber connection distance can reach 70 kilometers; 2. Fast transmission speed, optical fiber access can provide high-speed bandwidth such as 100Mbps, 200Mbps; 3. Low loss, the manufacturing purity of the optical fiber medium is extremely high, Therefore, the loss of optical fiber is extremely low, which can reduce the number of relay stations in communication lines and improve communication quality; 4. Strong anti-interference ability. Optical fiber is a non-metallic dielectric material. It uses optical fiber as a conductive medium and is not subject to electromagnetic interference.
What types of fiber optic interfaces are there?
Nov 08, 2022 pm 05:09 PM
Optical fiber interfaces include: 1. FC interface. The shell is made of metal and has threads at the interface. It can be fixed well when connected to the optical module. 2. ST interface. The material is made of metal and the interface is snap-on. It is often used for fiber optic wiring. rack; 3. SC interface, made of plastic, push-pull connection, the interface can be stuck on the optical module, often used in switches; 4. LC interface, made of plastic, used to connect SFP optical modules, the interface can be stuck on the optical module ; 5. PC interface, microsphere surface grinding and polishing; 6. APC interface, 8 degree angle and microsphere surface grinding and polishing.