Home Backend Development PHP Tutorial Simple php multi-threading solution

Simple php multi-threading solution

Jun 16, 2020 pm 01:15 PM
php

Simple php multi-threading solution

Simple PHP multi-threading solution

When we are doing projects, we have some needs, especially data The response processing takes a lot of time. Since PHP is a short-life cycle scripting language, after the default 30 seconds, PHP's data processing has not been completed, and PHP's life cycle is over.

At this time, you need to use an asynchronous concurrent processing strategy, that is to say, multiple requests that can be issued in one PHP call. These requests are not executed in sequence, but can be executed asynchronously and concurrently. Some requests are used in the background Process data, some requests are used to accept background response status, and do some simple interactions with users based on the status.

But here comes the problem. We all know that PHP itself does not support multi-threading, so how should we implement multi-threading in PHP?

1. Three methods of php simulation to achieve multi-threading

1. PHP multi-threading under Linux

The following things are the source Since PHP's pcntl_fork function. Because this function depends on the implementation of operating system fork, the things discussed in this article only apply to Linux/Unix. So let’s take a look at the usage of this function first. The PHP manual says this:

<?php
$pid = pcntl_fork();
if ($pid == -1) {
         die(&#39;could not fork&#39;);
} else if ($pid) {
         // we are the parent
         pcntl_wait($status); //Protect against Zombie children
} else {
         // we are the child
}
?>
Copy after login

Create a child process through pcntl_fork. If the return value is -1, then the creation of the child process failed. The creation was successful. The process ID will be returned to the parent process, and 0 will be returned to the child process. It is difficult to understand, so it should be written like this:

<?php
$pid = pcntl_fork();
if($pid == -1){
         //创建失败咱就退出呗,没啥好说的
         die(&#39;could not fork&#39;);
}
else{
        if($pid){
                //从这里开始写的代码是父进程的,因为写的是系统程序,记得退出的时候给个返回值
                exit(0);
        }
        else{
                //从这里开始写的代码都是在新的进程里执行的,同样正常退出的话,最好也给一个返回值
                exit(0);
        }
}
?>
Copy after login

This change will make it easier to understand, if your parent process wants to know that the child process exits normally. , you can add the previous pcntl_wait.

2. Through stream_socket_client method

function sendStream() { 
    $english_format_number = number_format($number, 4, &#39;.&#39;, &#39;&#39;); 
  
    echo $english_format_number;  
    exit(); 
    $timeout = 10; 
    $result = array(); 
    $sockets = array(); 
    $convenient_read_block = 8192; 
    $host = "test.local.com"; 
    $sql = "select waybill_id,order_id from xm_waybill where status>40 order by update_time desc limit 1 ";  
    $data = Yii::app()->db->createCommand($sql)->queryAll(); 
    $id = 0; 
  
    foreach ($data as $k => $v) { 
      if ($k % 2 == 0) { 
        $send_data[$k][&#39;body&#39;] = NoticeOrder::getSendData($v[&#39;waybill_id&#39;]); 
  
      } else { 
        $send_data[$k][&#39;body&#39;] = array($v[&#39;order_id&#39;] => array(&#39;extra&#39; => 16));  
      }  
      $data = json_encode($send_data[$k][&#39;body&#39;]); 
      $s = stream_socket_client($host . ":80", $errno, $errstr, $timeout, STREAM_CLIENT_ASYNC_CONNECT | STREAM_CLIENT_CONNECT); 
      if ($s) {  
        $sockets[$id++] = $s; 
        $http_message = "GET /php/test.php?data=" . $data . " HTTP/1.0
Host:" . $host . "
";  
        fwrite($s, $http_message); 
      } else {  
        echo "Stream " . $id . " failed to open correctly."; 
      }  
    } 
  
    while (count($sockets)) { 
  
      $read = $sockets; 
  
      stream_select($read, $w = null, $e = null, $timeout); 
       if (count($read)) {  
        /* stream_select generally shuffles $read, so we need to 
         compute from which socket(s) we&#39;re reading. */
        foreach ($read as $r) { 
  
          $id = array_search($r, $sockets); 
          $data = fread($r, $convenient_read_block); 
          if (strlen($data) == 0) { 
            echo "Stream " . $id . " closes at " . date(&#39;h:i:s&#39;) . ".<br>  "; 
            fclose($r); 
             unset($sockets[$id]); 
          } else { 
            $result[$id] = $data; 
          } 
        } 
      } else {  
        /* A time-out means that *all* streams have failed 
         to receive a response. */
        echo "Time-out!
"; 
        break; 
      }  
    }  
    print_r($result); 
  
  }
Copy after login

3. Replace multi-threading through multi-process

function daemon($func_name,$args,$number){ 
  while(true){ 
    $pid=pcntl_fork(); 
    if($pid==-1){ 
      echo "fork process fail"; 
      exit(); 
    }elseif($pid){//创建的子进程 
  
      static $num=0; 
      $num++; 
      if($num>=$number){ 
        //当进程数量达到一定数量时候,就对子进程进行回收。 
        pcntl_wait($status); 
  
        $num--; 
      }  
    }else{ //为0 则代表是子进程创建的,则直接进入工作状态 
  
      if(function_exists($func_name)){ 
        while (true) { 
          $ppid=posix_getpid(); 
          var_dump($ppid); 
          call_user_func_array($func_name,$args); 
          sleep(2); 
        } 
      }else{ 
        echo "function is not exists"; 
      } 
      exit();   
    } 
  } 
}  
function worker($args){  
  //do something 
  
}  
daemon(&#39;worker&#39;,array(1),2);
Copy after login

2. The real way to realize multi-threading in php

The real way to realize multi-threading in php can be done by installing the php extension pthread.

Click here to download https://github.com/krakjoe/pthreads But this download is version 3, which can only be used with php 7. We need to use version 2

Simple php multi-threading solution

Then refresh the page as follows, drag to the bottom:

Simple php multi-threading solution

Simple php multi-threading solution

Find version 2# on the next page

##Download, this v2 can only be used by php5

Download and install:

Or, you can download directly like this:

cd /tools  
   wget https://github.com/krakjoe/pthreads/archive/v2.0.10.zip  
   unzip   v2.0.10.zip  
   cd pthreads-2.0.10  
   /usr/local/php/bin/phpize  
   ./configure --with-php-config=/usr/local/php/bin/php-config    
   make  
   make install
Copy after login

Note: Your php needs to be enabled when compiling –enable-maintainer-zts

./configure --prefix=/usr/local/php --disable-fileinfo --enable-fpm --with-config- file-path=/etc --with-config-file-scan-dir=/etc/php.d --with-openssl --with-zlib --with-curl --enable-ftp --with-gd - -with-xmlrpc --with-jpeg-dir --with-png-dir --with-freetype-dir --enable-gd-native-ttf --enable-mbstring --with-mcrypt=/usr/local/ libmcrypt --enable-zip --with-mysql=/usr/local/mysql --without-pear --enable-maintainer-zts

vim /etc/php.ini 
添加
extension=pthreads.so
Copy after login
Restart php /etc/init.d/php-fpm restart

Thank you everyone for reading, I hope you will benefit a lot.

Recommended tutorial: "

php tutorial"

The above is the detailed content of Simple php multi-threading solution. For more information, please follow other related articles on the PHP Chinese website!

Statement of this Website
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

Video Face Swap

Video Face Swap

Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Tools

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

SublimeText3 Chinese version

SublimeText3 Chinese version

Chinese version, very easy to use

Zend Studio 13.0.1

Zend Studio 13.0.1

Powerful PHP integrated development environment

Dreamweaver CS6

Dreamweaver CS6

Visual web development tools

SublimeText3 Mac version

SublimeText3 Mac version

God-level code editing software (SublimeText3)

PHP 8.4 Installation and Upgrade guide for Ubuntu and Debian PHP 8.4 Installation and Upgrade guide for Ubuntu and Debian Dec 24, 2024 pm 04:42 PM

PHP 8.4 brings several new features, security improvements, and performance improvements with healthy amounts of feature deprecations and removals. This guide explains how to install PHP 8.4 or upgrade to PHP 8.4 on Ubuntu, Debian, or their derivati

7 PHP Functions I Regret I Didn't Know Before 7 PHP Functions I Regret I Didn't Know Before Nov 13, 2024 am 09:42 AM

If you are an experienced PHP developer, you might have the feeling that you’ve been there and done that already.You have developed a significant number of applications, debugged millions of lines of code, and tweaked a bunch of scripts to achieve op

How To Set Up Visual Studio Code (VS Code) for PHP Development How To Set Up Visual Studio Code (VS Code) for PHP Development Dec 20, 2024 am 11:31 AM

Visual Studio Code, also known as VS Code, is a free source code editor — or integrated development environment (IDE) — available for all major operating systems. With a large collection of extensions for many programming languages, VS Code can be c

Explain JSON Web Tokens (JWT) and their use case in PHP APIs. Explain JSON Web Tokens (JWT) and their use case in PHP APIs. Apr 05, 2025 am 12:04 AM

JWT is an open standard based on JSON, used to securely transmit information between parties, mainly for identity authentication and information exchange. 1. JWT consists of three parts: Header, Payload and Signature. 2. The working principle of JWT includes three steps: generating JWT, verifying JWT and parsing Payload. 3. When using JWT for authentication in PHP, JWT can be generated and verified, and user role and permission information can be included in advanced usage. 4. Common errors include signature verification failure, token expiration, and payload oversized. Debugging skills include using debugging tools and logging. 5. Performance optimization and best practices include using appropriate signature algorithms, setting validity periods reasonably,

PHP Program to Count Vowels in a String PHP Program to Count Vowels in a String Feb 07, 2025 pm 12:12 PM

A string is a sequence of characters, including letters, numbers, and symbols. This tutorial will learn how to calculate the number of vowels in a given string in PHP using different methods. The vowels in English are a, e, i, o, u, and they can be uppercase or lowercase. What is a vowel? Vowels are alphabetic characters that represent a specific pronunciation. There are five vowels in English, including uppercase and lowercase: a, e, i, o, u Example 1 Input: String = "Tutorialspoint" Output: 6 explain The vowels in the string "Tutorialspoint" are u, o, i, a, o, i. There are 6 yuan in total

How do you parse and process HTML/XML in PHP? How do you parse and process HTML/XML in PHP? Feb 07, 2025 am 11:57 AM

This tutorial demonstrates how to efficiently process XML documents using PHP. XML (eXtensible Markup Language) is a versatile text-based markup language designed for both human readability and machine parsing. It's commonly used for data storage an

Explain late static binding in PHP (static::). Explain late static binding in PHP (static::). Apr 03, 2025 am 12:04 AM

Static binding (static::) implements late static binding (LSB) in PHP, allowing calling classes to be referenced in static contexts rather than defining classes. 1) The parsing process is performed at runtime, 2) Look up the call class in the inheritance relationship, 3) It may bring performance overhead.

What are PHP magic methods (__construct, __destruct, __call, __get, __set, etc.) and provide use cases? What are PHP magic methods (__construct, __destruct, __call, __get, __set, etc.) and provide use cases? Apr 03, 2025 am 12:03 AM

What are the magic methods of PHP? PHP's magic methods include: 1.\_\_construct, used to initialize objects; 2.\_\_destruct, used to clean up resources; 3.\_\_call, handle non-existent method calls; 4.\_\_get, implement dynamic attribute access; 5.\_\_set, implement dynamic attribute settings. These methods are automatically called in certain situations, improving code flexibility and efficiency.

See all articles