The network card ip address cannot be found under centos6.5
Problem:
Before I built a test environment through a virtual machine, I added and deleted network cards several times. When the virtual machine was started again, I found that the network could not be pinged. Log in. After arriving at the system, I found that the address of the virtual machine was missing.
Solution process:
Enter ifconfig in CentOS 6.5, only the local loopback port is displayed, as follows:
No My original eth0 port appears because the eth0 network card is not started. Enter ifconfig eth0 up to enable the eth0 network card, and ifconfig eth0 down to disable the eth0 network card.
After entering ifconfig eth0 up on the interface, press Enter and enter ifconfig again. You can see that the network card eth0 appears:
However, at this time, again A problem occurred. Although I saw the network card, there was no address.
At this time, go into the network card configuration file and view:
You can see that this network card has an address.
In fact, the reason is very simple, because the network of the network card is not open. We can open the network through ifup eth0:
Enter ifconfig again to see Here’s the complete information:
Related tutorial recommendations: centos tutorial
The above is the detailed content of The network card ip address cannot be found under centos6.5. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
How do websites set black/whitelist IP restrictions and country and city IP access restrictions through nginx?
Jun 01, 2023 pm 05:27 PM
1. Black/white list IP restricted access configuration nginx There are several ways to configure black and white lists. Here are only two commonly used methods. 1. The first method: allow, denydeny and allow instructions belong to ngx_http_access_module. nginx loads this module by default, so it can be used directly. This method is the simplest and most direct. The setting is similar to the firewall iptable. How to use: Add directly to the configuration file: #Whitelist settings, followed by allow is accessible IPlocation/{allow123.13.123.12;allow23.53.32.1/100;denyall;}#Blacklist settings,
What does binding ip and mac mean?
Mar 09, 2023 pm 04:44 PM
IP and mac binding refers to associating a specific IP address with a specific MAC address, so that only the device using the MAC address can use the IP address for network communication. Binding ip and mac can prevent the IP address of the bound host from being spoofed. Prerequisites: 1. The MAC address is unique and cannot be spoofed; it can only be bound to hosts on the network directly connected to the router (that is, The host's gateway is on the router).
What kind of network card is Crab card?
Oct 09, 2022 pm 02:42 PM
The crab card refers to the Realtek network card. Its icon looks like a crab, so it is called the crab card network card. A network card is a piece of computer hardware designed to allow computers to communicate on a computer network, allowing users to connect to each other via cables or wirelessly. Realtek uses the crab as its corporate logo and hopes that it can imitate the symbolism of the crab's tenacity, fearlessness, and courage to challenge in nature.
How to set directory whitelist and ip whitelist in nginx
May 18, 2023 pm 03:52 PM
1. Set the directory whitelist: There is no restriction on the specified request path. If there is no restriction on the request path to the api directory, it can be written as server{location/app{proxy_passhttp://192.168.1.111:8095/app ;limit_connconn20;limit_rate500k;limit_reqzone=fooburst=5nodelay;}location/app/api{proxy_passhttp://192.168.1.111:8095/app/api}}#Because nginx will give priority to accurate matching
How to check IP address on WeChat
May 31, 2023 am 09:16 AM
How to check the IP address on WeChat: 1. Log in to the computer version of WeChat, right-click the taskbar at the bottom of the screen, and click "Task Manager"; 2. When the task manager pops up, click "Details" in the lower left corner; 3. Task management Enter the "Performance" option of the browser and click "Open Resource Monitor"; 4. Select "Network" and check the WeChat process "Wechat.exe"; 5. Click "TCP Connection" below to monitor the WeChat network IP related situation. Sending a message and getting a reply will reveal the other person's IP address.
How does NGINX count the PV, UV, and independent IP of the website?
May 19, 2023 am 09:13 AM
Concept: uv (uniquevisitor): unique visitor, each independent Internet computer (based on cookies) is regarded as a visitor, and the number of visitors who visit your website within a day (00:00-24:00). Visits to the same cookie within a day are only counted once PV (pageview): visits, that is, page views or clicks, each visit to the website by the user is recorded once. When a user visits the same page multiple times, the total number of visits is counted. Independent IP: The same IP address is only counted once within 00:00-24:00. Friends who do website optimization are most concerned about this. Let me first state the environment. This run nginx version 1.7, the backend tomcat runs dynamic
What should I do if my wifi shows no IP allocation?
Aug 30, 2023 am 11:58 AM
Solution to wifi showing no IP allocation: 1. Restart the device and router, turn off the Wi-Fi connection on the device, turn off the device, turn off the router, wait a few minutes, then reopen the router to connect to wifi; 2. Check the router settings and restart DHCP, make sure the DHCP function is enabled; 3. Reset network settings, which will delete all saved WiFi networks and passwords. Please make sure they are backed up before performing this operation; 4. Update the router firmware, log in to the router management interface, and find the firmware Update options and follow the prompts.
How to check whether the network card is normal in Linux
Mar 22, 2023 am 10:08 AM
How to check whether the network card is normal in Linux: 1. Check the network card status through the "mii-tool" command; 2. Check the network status through "network status"; 3. Check the information of all network interfaces in Linux through the "ifconfig -a" command; 4. Query the network card information through the "ethtool" command.
