192.168.12.1 – Admin Login & Change Password & Fix Login Issues - MiniTool

What is 192.168.12.1? How to log in to the 192.168.12.1 administrator interface successfully? Want to know the answer? Continue reading this article! This article will guide you through the detailed steps of logging in 192.168.12.1.

192.168.12.1 Detailed explanation

192.168.12.1 is the default gateway IP address preconfigured by the router and modem, used for default mode login during the first setup. While not all brands use this IP address, some brands do use it as a default gateway for default login routers.

How to log in to 192.168.12.1

If you have not set a password yet, or your Wi-Fi network is not optimized for your use, you will need to use 192.168.12.1 to log in to the router to make any changes. The following is the method for the administrator to log in at 192.168.12.1:

Step 1: Connect your device to the router using a network cable.

Step 2: Open the web browser, enter 192.168.12.1 or https://www.php.cn/link/767a40871fcc018629b26f3a9ff39e19 in the address bar, and then press Enter .

Step 3: Enter your default username and password and click the Login button.

Step 4: After logging in successfully, you will enter the router settings page, where you can access Internet settings, wireless settings, system and management options.

192.168.12.1 Troubleshooting of login issues

Sometimes, you may find that 192.168.12.1 does not work properly. How to solve this problem? Here are some solutions:

1. Make sure you are accessing the IP address 192.168.12.1, not the wrong IP address, for example 192 168 121, 192.168.12,1, https://www.php.cn/link/767a40871fcc018629b26f3a9ff39e19 , 192.168.l2.l, 192.168.12 1.
2. If you forget your login password and cannot access the router page, use the reset button to restore the router to factory settings.
3. If using Wi-Fi connection, make sure you are connected to the same Wi-Fi network you wish to access from your web browser.
4. Make sure that the default IP address 192.168.12.1 has not been changed.

How to reset username/password

After logging in to 192.168.12.1, you can reset your username and password:

1. Access the General Settings menu.
2. Select the wireless settings option.
3. In the SSID box, enter your preferred Wi-Fi network name.
4. Save the modification.
5. If you want to change your Wi-Fi network password, this option is in the same menu as your SSID. Select the Wi-Fi network password box and enter your preferred password.
6. Now you need to set up the login information for your router and Wi-Fi network.

How to reset the router

If you forget your router password, you can try resetting your router:

1. Find the reset button (usually a small hole) next to or at the bottom of the Ethernet port.
2. Press and hold the reset button for 10-15 seconds and observe the indicator light.
3. When the router is quickly turned off and opens again, release the button.
4. The router will restart and it will take several minutes to restore to the default mode.
5. Access the router for reset using the default IP address and login details.

The above is the detailed content of 192.168.12.1 – Admin Login & Change Password & Fix Login Issues - MiniTool. For more information, please follow other related articles on the PHP Chinese website!