When the computer turns on, there is no beep or display.
What should I do if there is no beep when the computer is turned on and the monitor does not display?
The computer turns on and the screen is black but there is no beep. The reasons are: memory failure; graphics card failure; monitor failure. No sound means there is a problem with the CPU and motherboard. It is recommended to clean the dust on the motherboard. If it is in the south, please put the machine under the sun (not direct sunlight) to remove moisture.
There is no beeping sound when the computer is turned on. This means that the motherboard has not passed the self-test and cannot be started. Usually the gold finger of the memory or graphics card is oxidized, resulting in poor contact between the memory and the memory slot, and poor contact between the graphics card and the graphics card slot, resulting in the inability to boot or a black screen at boot.
Observe the indicator light on your case to see if it lights up when you turn on the computer. If it does, check your monitor's power supply (socket) and power cord (try changing them).
The computer cannot be started, the monitor has no display, and the host has no alarm sound. Description: There is no power at all. It is likely that the power cord is poorly connected to the external power supply, or there is a problem with the power socket.
After the computer is turned on, there is no self-check, no beep, no alarm, no signal on the monitor, only the fan is running...
1. The computer cannot be started, and there is no display on the monitor. The host has no alarm sound, indicating that there is no power at all. It is likely that the power cord is not connected to the external power supply, or there is a problem with the power socket.
2. When the computer is turned on, the screen is black and there is no beep. The reasons are: memory failure; graphics card failure; monitor failure. If there is no sound, it means there is a problem with the CPU and motherboard. It is recommended to clean the dust on the motherboard. If it is in the south, please put the machine under the sun (not direct sunlight) to remove moisture.
3. There is no beeping sound when the computer is turned on. This means that the motherboard has not passed the self-test and cannot be started. Usually the gold finger of the memory or graphics card is oxidized, resulting in poor contact between the memory and the memory slot, and poor contact between the graphics card and the graphics card slot, resulting in the inability to boot or a black screen.
4. Plug in the power cord tightly, check the plug on the plug board, and confirm that the plug board is powered on. Confirm that the wire from the host power supply to the plug-in board is good, then take the power supply and connect it to the 24P plug on the motherboard, short-circuit the green and any black wires. If the power fan is spinning, it means there is no problem with the power supply. If the power fan is not spinning, it means the power supply is broken. Replace it with a new one. power supply.
5. There is no self-check when turning on the computer. Generally, please check whether the graphics card and memory are dusty or loose. (Just remove the memory and graphics card and turn on the computer. Will it trigger an alarm?) If these 2 are correct, it is a motherboard problem.
6. Step 1: Check the computer's external connection cables and signal cables. After re-plugging and unplugging them in sequence, observe whether the fault is eliminated. Step 2: If the fault persists, open the chassis and observe whether the components inside the chassis are visible to the naked eye. damage, whether there are excess metal objects causing a short circuit, and whether the motherboard capacitor is exposed.
There is no beep when the computer starts up
Step 1: First check whether the external wiring of the computer is connected properly, and re-insert each connection to see if the fault is eliminated.
Normally, the desktop computer will perform a self-test when it is turned on. A short beeping sound indicates that the self-test is normal. If your desktop turns on without beeping, it may mean a hardware failure or a connection issue causing the self-test to fail. Here are some possible solutions: Check the power supply and power connections.
The solution to the problem that the computer does not make a beeping sound when the computer turns on and the monitor does not light up: Observe the indicator light on your case to see if it lights up when you start the computer. If it does, check your monitor’s power supply (socket) and power supply. line (try changing the line).
The computer turns on with a black screen and no beep. The reasons are: memory failure; graphics card failure; monitor failure. If there is no sound, it means there is a problem with the CPU and motherboard. It is recommended to clean the dust on the motherboard. If it is in the south, please put the machine under the sun (not direct sunlight) to remove moisture.
What to do if there is no sound when the desktop computer is turned on
Check whether the connection between the host and the speaker is loose or disconnected, whether the speaker power is turned on, and whether the speaker's volume knob is turned down to the minimum. For independent sound cards, check whether the sound card is in good contact with the motherboard slot. You can re-insert the sound card. For motherboard-integrated sound cards, check to see if they are disabled in the BIOS.
Check whether the power supply and power connection are normal. Check whether the memory module is inserted correctly or whether it is faulty. Check whether other hardware is loose or poorly connected (such as hard drive, graphics card, sound card, etc.). Try clearing the CMOS by removing the battery from the motherboard, then waiting a few minutes before plugging it back in.
Shut down the computer and restart it to add new hardware." Note that it says shut down and then restart, not restart. Generally speaking, the problem can be solved after restarting.
Solution to the problem of no sound after the computer is turned on 2. For users who are not good at computers, they can fix it through related software such as Tencent Computer Manager, and enter the functional interface of Tencent Computer Manager's computer clinic.
The above is the detailed content of When the computer turns on, there is no beep or display.. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

While the Nintendo Direct about the Switch 2 was only about an hour long, the accompanying deep dives released offer even more information and peeks at the much-anticipated console, which launches on June 5, 2025.Now, as spotted in “Ask the Develop

The best JRPGs (Japanese role-playing games) in 2025 use theatrical storytelling and vibrant ensemble casts to weave powerful experiences that stay with us long after we put the controller down.Contrary to the name, JRPGs aren't necessarily all from

With iOS 18.4, Apple added support for robot vacuums to HomeKit. There are a few Matter-enabled robot vacuums that can be added to the Home app for use with Siri, including the Deebot X8 Pro Omni from Ecovacs. I've been testing the X8 Pro Omni for th

Apple today provided developers with the first beta of an upcoming iOS 18.5 update for testing purposes. Work on iOS 18 is starting to wind down with iOS 19 set to be introduced in a couple of months, so iOS 18.5 has just a handful of minor new featu

In Apple's iOS 18.4 software update, there's a new Ambient Music feature available in the Control Center options on iPhone. It's free to use, and does not require an Apple Music subscription. It's also more customizable than most users probably reali

Dio is a small company focused on delivering a single product for the Apple ecosystem: a low-cost AirPlay speaker system known as Dio Node. Initially launched as a crowdfunded Indiegogo campaign back in 2022, the Dio Node began shipping to backers la

When using macOS Finder in List view, you'll see the sizes of individual files – but not folders.Instead, folders show a pair of dashes (--) in the Size column. macOS skips calculating folder sizes by default to keep List view performance fast, espec

The PlayStation 2 is still the best-selling video game console of all time, having sold more than 160 million units to customers worldwide. But the Nintendo Switch ain't far behind. In fact, it's inching ever closer to that record every month and a f
