Is it worth buying a JD self-assembled computer?
Whether JD.com’s self-assembled computers are worth buying has always attracted much attention. This article will analyze this issue in depth and comprehensively analyze it from multiple perspectives such as purchasing strategy, cost performance, and after-sales service to help everyone make a wise choice.
#Is it worth buying a JD self-assembled computer?
Self-operated ones are almost the same. This configuration is that the SSD is relatively rubbish, and you have to buy a mechanical disk and memory (DDR4) yourself, which is expected to cost about 600 more (it is best to buy two chassis fans, don’t be cheap). If the price is acceptable, buy it. The advantage of JD is that after-sales service is easier.
Are JD.com’s self-operated climbing-assembly computers reliable?
Jingdong’s self-operated climbing computers have reliable performance and use genuine original parts from the manufacturer. Each part has been strictly inspected and has a formal invoice. The after-sales service is very good, and there is a free replacement service for faulty repairs.
Modified and assembled computer air conditioners have better heat dissipation effects, can provide good protection for the computer system, and better ensure the stability of the machine. In addition, modified and assembled computers can also be highly customized according to different actual needs, and more Suitable for the needs of most computer users. All in all, JD.com’s self-operated climbing-assembled computers are highly reliable and very popular.
Which brand of Jingdong’s self-assembled computer hosts is better?
There is no brand when buying a self-assembled computer on JD.com, because the assembled computer is assembled with accessories from various manufacturers to form a host. If you want a brand, you can buy Lenovo or HP Dell, etc. branded.
Will I get an assembled machine when I buy a computer in Jingdong’s self-operated store?
Of course when you buy a computer in JD.com’s self-operated store, you will get an assembled machine. Because any brand of computer you buy is not a host manufacturer. Give a simple example. Let's say you buy a Lenovo computer. So the CPU of this computer is produced by Intel. The memory is produced by Weibang. The motherboard is produced by ASUS. The graphics card is produced by AMD. The power supply is produced by Jinwada or other brands. Lenovo does not produce computers, it is just a transporter of hardware.
Will there be an assembly machine when buying a computer in Jingdong’s self-operated store?
The self-operated products are all genuine and can be trusted. However, some items are returned by others. You can return them if you don’t want them. It is usually easy to return items if you are self-operated.
Laptops are all original and authentic. Desktop computers are generally not recommended to be purchased in online stores. Their performance is relatively strong, but the price is extremely cheap. Their motherboards and graphics cards are generally The version exclusively for Internet cafes has a very low cost, slightly reduced performance, and many other accessories are from second- and third-tier brands.
Why don’t JD.com’s self-assembled computers come with memory sticks?
The operation mode of the merchant is that the price of the memory module is transparent and the profit is low.
In order to lower the overall price, the price without the memory module is cheaper.
Is JD.com’s self-operated assembly machine reliable?
Take the assembled computer as an example:
Jingdong’s self-operated assembled computers are still very reliable in all aspects, but those assembled by third-party sellers are not so reliable. It is recommended to use Jingdong’s self-operated computers Buy a computer.
If you have time, you can organize the purchase of computer accessories. Buying brand new accessories will not only ensure the quality, but also the price will be more favorable. It is not recommended to buy computers in physical stores.
How much does it cost to assemble a computer?
Graphics card rtx2060 2500 yuan (supports ray tracing)
cpu R5 3600 1400 yuan
Motherboard: B450 600 yuan
m.2 Solid state drive 500G 600 Yuan
4T mechanical hard drive 600 yuan
Main case with fan + power supply 600w 500 yuan
Memory stick 8G two, 500 yuan
Keyboard and mouse 100 Yuan
List for assembling a computer?
Assembling a computer does require a checklist, because when we assemble the computer, after determining the configuration and operation requirements of the computer, we can purchase some suitable motherboards online, and then determine the power supply, graphics card and other configurations based on the motherboard. If you ask, just make a list and ask the computer factory or dealer directly to buy it
Assemble the computer, okay?
Assembling a computer can have some benefits, such as:
1. Customized configuration: Assembling a computer can choose the appropriate hardware configuration according to personal needs, and you can choose more based on your own purpose and budget. Suitable components.
2. Cost-effectiveness: Assembling a computer is more cost-effective than purchasing a brand-name machine. You can save costs by choosing hardware with higher cost-effectiveness.
3. Upgradeability: Assembling a computer is usually easier to upgrade the hardware. The hardware can be upgraded or replaced at any time as needed to improve the performance of the computer.
4. High degree of freedom: When assembling a computer, you can choose the appearance design, color matching, etc. according to your personal preferences, and you can create a unique computer.
However, there are also some challenges and risks in assembling a computer, such as requiring certain professional knowledge and skills, choosing inappropriate hardware that may cause compatibility issues or poor performance, possible risks during the assembly process, etc. . Therefore, if you do not have enough experience and skills, or do not know much about computer hardware, it may be more suitable to buy a branded machine.
The above is the detailed content of Is it worth buying a JD self-assembled computer?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics











After turning on the laptop, the screen goes black and there is nothing on the desktop. There is no icon, only a mouse arrow... Damage to the picture tube or line output circuit. Failure of the picture tube or line output circuit will also cause a black screen without raster when the monitor is powered on. It is also the main cause of a black screen after the notebook is turned on. Sometimes the inability to boot is caused by a short circuit in some components, such as external USB devices, keyboards, mice, or power adapters. Try unplugging these devices and booting with only the battery installed to see if you can enter the BIOS. some type of. A black screen may occur when the computer starts up because the motherboard, monitor and graphics card in the computer are damaged, or the computer configuration is too old. This phenomenon may also occur. Most of the reasons are caused by process errors.

What to do if your Lenovo laptop has a black screen 1. When your Lenovo laptop has a black screen problem, you can try the following solutions: Check the power adapter and battery: Make sure the power adapter is connected properly and the battery is not exhausted. Try removing the battery and relying solely on the power adapter for power, then try starting again. 2. The reason and solution for the black screen of Lenovo laptop that cannot be turned on: The motherboard is not powered on. 3. The Lenovo laptop’s power-on button is on but the screen is black. If you encounter the situation where the Lenovo laptop’s power-on button is on but the screen is black, you can remove the battery on the back of the laptop, connect the computer to the power adapter only, and try to power it on once. If it boots normally, the battery is in contact. Caused by defective or battery failure. 4. The first reason is that the laptop’s power adapter is damaged and cannot be connected.

Can a computer log in to two WeChat IDs? 1. A computer can log in to two WeChat IDs. You can use the web version and PC version to log in. The operation method is as follows. Equipment: Lenovo computer System: Windows 10 Software: Google Chrome, WeChat version 51 First open the browser, then search on Baidu and click to enter. 2. You can log in to two WeChat IDs on your computer. First download the PC version of WeChat and install it. Find the "WeChat" shortcut icon on the desktop, right-click to display the "Menu", and select the last "Properties" option. 3. The computer can log in to two WeChat IDs. Take the Windows 7 operating system and WeChat version 0.0.47 as an example. 4. Later, WeChat became available on the computer, and many friends found that they could only log in to one WeChat account on their computer, which was very uncomfortable.

How to connect a Huawei phone to a computer via USB to access the Internet. First, we open the phone settings and search for "HDB". Then we click to open "Mobile Network Sharing" in More. Then we can click to open "USB Sharing Network" in the pop-up window. Summary First, connect the Huawei mobile phone to the computer through the data cable. Open "Settings" on your phone and enter the settings interface. Click "Personal Hotspot", select "USB tethering" and click the switch button at the back to turn it on. First click "Settings About Phone", then click "Version Number" 7 times in succession. You will be prompted to enter developer mode. Then return to the "Settings" list, "Developer Options" will appear, then click to enter "Developer Options", turn on the "USB Debugging" switch, and click

How to enter the BIOS settings of the computer. The method to enter the BIOS settings of the computer is: press the F2 key when the computer is turned on. The specific operation process is as follows: Find the power button on the computer keyboard and press it to turn on the computer. Then click to enter the boot program and load the boot animation. After that, find the F2 key on the keyboard and press the F2 key. You can enter the BIOS interface by pressing the DELETE key or the F1F2 key when turning on the computer power. Taking a Lenovo computer as an example, the operation method is as follows: When turning on the computer power, press and hold the F2 key on the Lenovo computer. At this time, you can see on the computer screen that you have entered the BIOS interface, and all you can see are English letters. There will be a screen prompt shortly after booting, then press F2 as prompted.

How to turn off the laptop screen and enter the computer, select the start icon in the lower left corner. Find and click to enter the settings option. In the settings interface, select the first one and go to system options. Click to enter the power and sleep options, then turn on the sleep screen and set the time. Question 1: How to turn off the screen on a laptop? Right-click the power icon in the lower right corner of the screen, and then select "Power Options" to enter the power options setting window. (The settings window can also be opened through "Control Panel → Power Options"), and then click "Choose when to turn off the display." Which key on the computer is to pause the screen: The shortcut key to pause the computer screen is "Win+L". When pressed, the computer will pause the screen. How to turn off the screen of Lenovo notebook thinkpad 1. The shortcut key to turn off the computer screen is to press windows at the same time.

Does the newly assembled computer keyboard light not light up? The motherboard model should be UEFIbios. First find a keyboard with PS2 port, enter bios, turn off UEFI boot, and change to Legacy mode. If there is fast boot, turn off options like FastBoot, UEFI boot, turn on fast boot, and enter the system. USB interface detection may be turned off before, and USB devices can be used to assemble the computer after entering the system. The mouse and keyboard lights do not light up when the computer is turned on? If the keyboard light does not come on, there is a high possibility of memory failure, or it may be caused by static electricity on the motherboard or the motherboard is faulty. Use an eraser to wipe the gold finger of the memory graphics card, and remove and insert the memory several times. The problem remains. There are dual memory sticks and a single memory stick is used for testing. The problem persists. Re-plug the various cables inside and outside the chassis, and then unplug the connector on the motherboard.

How to set the bios password of Lenovo computer 1. First, we press f2 to enter the bios and switch to the security menu item. Then we use the up and down arrow keys to select the password option and press the Enter key to enter. Disabled means that the bios super administrator password is not currently set. If enabled, it means that the bios password has been set. 2. The first step is to enter the bios interface. After booting, press F12 immediately to enter the bios startup interface. In this computer information menu bar, you can see main hardware information such as computer model, BIOS version, CPU, memory, hard disk, optical drive, etc. Step 2: Press the right arrow key → on the keyboard to enter the hardware configuration settings. 3. Insert the USB flash drive into the computer, and then
