


How to turn off the spdif out on the ASUS motherboard that is always on?
The SPDIF OUT indicator light on the ASUS motherboard is always on, which may be caused by a setting problem. To turn it off, you can follow the steps below: First, enter the computer's BIOS setup interface; then, find the "Advanced" or "Advanced Settings" option; next, in the audio settings or sound settings Find the SPDIF OUT option; finally, set it to "Disabled" or "Off". After completing these steps, save the settings and restart the computer, the SPDIF OUT indicator light should turn off. If the problem persists, it is recommended to consult the ASUS motherboard user manual or contact ASUS customer service for further assistance.
There is a spdif out on the ASUS motherboard that is always on. How do I turn it off?
Switch to Advanced in the BIOS, find APM (Advanced Power Management), and find ErP Ready. If so, just enable it.
Which one should I choose for spdif audio output?
To choose optical SPDIF audio output. The reason is that optical SPDIF audio output has better interference resistance and lower noise than coaxial SPDIF audio output, and can provide clearer and higher-quality audio signals. In addition, if you are using a digital audio device (such as a digital music player, Blu-ray player or digital TV, etc.), you can also consider choosing HDMI audio output, because HDMI audio output supports higher audio transmission quality and can even support HD Dolby audio format. : When we purchase digital audio equipment, we should consider it based on the audio output support of the equipment. In addition, when purchasing audio output cables, we can choose higher quality cables to achieve better audio transmission effects.
What is SPDIFOUT on the ASUS P5VD2-X motherboard for?
SPDIFOUT is a digital audio output interface that can output audio signals from the computer's motherboard to digital audio devices (such as home theater speakers) to ensure high-fidelity sound quality. Because digital audio signals are transmitted using optical fiber or coaxial cables, they are not affected by electromagnetic interference, so they are more stable and clearer than ordinary analog audio signal transmission. Through the connection of the SPDIFOUT interface, users can connect the computer audio output to the home theater speakers to achieve a perfect audio-visual entertainment experience. If you are interested in digital audio, you can learn more about "PCM", "DolbyAC-3", "DTS" and other digital audio codec technologies, as well as the purchase and debugging skills of digital audio equipment, which will be useful for your daily use. Computers bring great benefits.
Does ASUS z690-tuf have a 5v3-pin interface?
ASUS z690-tuf motherboard does not provide 5v3-pin interface. The main interfaces provided by this motherboard include PCIe x16 slot, USB 3.2 Gen 2 Type-C interface, USB 3.2 Gen 2 Type-A interface, USB 3.2 Gen 1 Type-A interface, HDMI interface, DP interface, SPDIF interface, RJ45 interface, etc. If you need to use the 5v3-pin interface, it is recommended that you choose another adapted motherboard.
Asus fx80g parameters?
Asus FX80G is a high-end gaming laptop with good performance and quality. It uses the seventh-generation Intel Core i7 processor and NVIDIA GeForce GTX 1050Ti independent graphics card, which has more powerful computing and game processing capabilities. In addition, the combination of 16GB memory, 256GB solid-state drive and 1TB mechanical hard drive allows it to start quickly and store large amounts of data. It is equipped with a 15.6-inch display with a resolution of 1920x1080 and supports IPS wide viewing angle technology, with excellent results. In addition, the computer is also equipped with RGB backlit keyboard, WiFi, Bluetooth, 2 USB 3.0 interfaces, 1 USB 2.0 interface, HDMI, VGA and other common interfaces.
Which one should I choose for spdif output?
Select hdmi for spdif output. spdif is an optical fiber interface that only transmits audio data, and hdmi is a general data interface that can transmit video and audio data. ASUS motherboard is a computer component product of the communications company ASUS. It is divided into various models and specifications. It is also one of ASUS's main products. ASUS P5B series is a series of products with the most achievements and the highest achievements since its launch. ASUS motherboards feature silent cooling, fan-free operation, and dual channels. Among them, ASUS P5B series has created the most and highest results.
The above is the detailed content of How to turn off the spdif out on the ASUS motherboard that is always on?. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics











What is the installation path of the graphics card driver? 1. Turn on the computer, click Computer, and open the Device Manager. For all devices on our computer, find the installation directory location of the graphics card driver. Click on the display adapter, find the device to which the driver belongs, and click to select properties. After entering properties, select Update Driver. 2. The graphics card driver is best installed on the C drive. By default, some drives are installed on the system disk. Cannot make selection. If you want to choose, you can install it on other disks. It is better to divide the hard disk into multiple areas than one area. The access speed through the C drive is faster than the D drive, and the access speed through the D drive is faster than the E drive. 3. It cannot be changed otherwise problems will occur. The driver is installed in C:\ProgramFiles, and C:\WINDOW

When I turn on the computer, it always stops at the motherboard logo screen. Nothing happens when I press anything, and I can't enter the bios? This is usually because the BIOS battery voltage is too low, and the system time has returned to the BIOS preset time, such as 2000.1.1, 00:00. You can use it after pressing F1 to enter the bios and set the time. Do not turn off the AC power after shutting down at night. Generally, the system time will not be lost when you turn on the computer the next day, and you can still enter the system normally. If the AC power is cut off, the battery voltage cannot sustain the power consumption of the bios, and the computer will be in the same state again the next day when it is turned on. Replacing the bios battery is the ultimate solution. Win11 is stuck on the motherboard logo interface when booting? 1. It is a problem with bios settings. We only need to find the corresponding setting items.

How to set up the U disk boot in the HP notebook bios (how to enter the HP computer bios) and then insert the U disk to be booted first into the USB port of the notebook. If you want to install the system, the system program must have been prepared in the U disk. First, open the laptop. Make sure the laptop is turned off. Setting the bios must be done with the computer turned off. Then insert the U disk that you want to boot first into the USB port of the notebook. If you want to install the system, the prerequisite is that the system program has been prepared in the U disk. Take the HP ProDesk400G5SFF desktop computer as an example. Set the BIOS disk startup method: First, restart the computer and wait for the startup screen to appear. There are two ways to set up USB disk startup on HP notebooks. One is to directly press the shortcut key to select

How to cancel the MSI motherboard icon when booting 1. Press the DEL key when booting to enter the BIOS. Generally, in the "Advanced Features" item, you can find the words MSI motherboard LOGO screen. Select DISABLED, save and exit. There will no longer be this MSI motherboard LOGO screen when you turn on the computer in the future. MSI motherboard refers to the motherboard brand developed by MSI (MSI Technology Company). 2. The logo displayed when the computer is turned on is basically that of the motherboard manufacturer. You can set QUICKPOST to DISENABLE in the BIOS, so that the logo will generally no longer be displayed. It will display computer configuration-related information and give you more details. 3. First, teach you how to flash the BIOS in Windows environment. First: Go online

Tutorial on assembling a computer and installing a system? Nowadays, the system installation for assembling computers is very simple and convenient, and only requires a CD. First enter the bios settings, set the computer to boot first with the CD-ROM drive, then restart the computer and load the system CD into the CD-ROM drive. The CD will automatically enter the installation state. At this time, you only need to manually repartition the partitions, and the rest will be completed automatically. How to install win11 system when assembling a computer? 1. First, we need to download a win11 image file from this site before installing it. 2. The win11 image file has undergone a large number of professional tests to ensure stable installation and smooth operation. 3. After the download is completed, load the folder in the download path and run the "windowssetup" process in it.

How to enter bios after assembling a computer? Before entering the BIOS, you need to make sure that the computer is completely shut down and powered off. Here are several common ways to enter the BIOS: 1. Use shortcut keys: Most computer manufacturers will display a prompt message at startup telling you which key to press to enter the BIOS settings. Usually the F2, F10, F12 or Delete key. After pressing the appropriate keys, you should be able to see a screen with information about your computer's hardware and BIOS settings. 2. Use the button on the motherboard: Some computer motherboards have a dedicated button for entering BIOS settings. This button is usually labeled "BIOS" or "UEFI". After pressing the button you should be able to see

Notebook computer frequency reduction method 1. Open the control panel on the computer desktop. Click Power Options in Control Panel. Change the power plan in Power Options to Energy Saving. After changing to energy saving, you can see in the task manager that the notebook CPU operating frequency has been reduced. 2. The heat dissipation function is realized simply through the physical thermal conduction principle. Place a plastic or metal cooling base on the bottom of your notebook and raise it to promote air circulation and heat radiation, which can achieve cooling effects. Install several cooling fans on the heat dissipation base to improve heat dissipation performance. 3. When no program is running, the CPU automatically reduces the frequency to save power; when the CPU temperature or the operating environment temperature is too high, the CPU automatically reduces the frequency to prevent burning. You can also try the suggestions from friends on the first floor. Please refer to the setting method.

1. Win11 does not have very high requirements for the motherboard. You can first download healthcheck or whynotwin11 to check whether your other hardware devices support it (you can download it from this site). 2. If other conditions are met and only tpm does not meet the requirements, you can enable tpm in the bios settings. 3. Restart the system, and then press [DEL] on the keyboard to enter the BIOS settings when the logo pops up. 4. Enter the [Settings] option and [Miscellaneous] option in sequence. 5. Find [Intel Platform Trust Technology (PTT)] below and set it to [Start]. 6. If it is an AMD platform, then
