5 ways to fix iPad Air 5 screen failure. Do you need to replace the screen?

Recently, many users have reported strange lags on their iPad Air 5. As they swiped their fingers across the screen, the iPad suddenly stopped responding and the screen froze, as if it had completely lost functionality. This problem seems to be pervasive and disturbing.

After some iPad users use it for a period of time, the iPad itself becomes better again. However, there are still some iPads that are stuck all the time, and users dare not operate them at will. So what should I do?

The iPad Air 5 screen freezes or fails. We need to start with the possible causes and then choose the appropriate solution!

Possible reasons why the iPad screen freezes or fails:

The iPad has too many programs running in the background, causing the system to be overloaded and eventually leading to a serious crash problem.

The system crashes because there are too many apps installed on the phone that occupy a large amount of running memory, and they are often switched back and forth. In order to solve this problem, we can take some measures to optimize the operation of the mobile phone. First, we can uninstall some apps that are not commonly used or occupy a large amount of memory. By entering the phone's settings interface, find the application management or application list, and then check the memory occupied by each APP one by one, and uninstall those APPs that occupy a large amount of memory and are not commonly used. Secondly, we can close some unnecessary apps running in the background. Enter the settings interface of your phone, find the application management or application list, then select the running APP and close unnecessary apps running in the background. In addition, we can limit the background activities of some APPs. Enter the settings interface of your phone, find the application management or application list, select the APP that needs to limit background activities, and then set it to prohibit background activities. Finally, we can also try to restart the phone. Sometimes running the phone for a long time will cause some system caches to accumulate. Restarting the phone can clear these caches, thereby improving the speed and stability of the phone. Through the above optimization measures, we can reduce the number of apps that occupy a large amount of running memory, reduce the frequency of switching back and forth, and thereby reduce the risk of system crashes. I hope the above methods can help everyone solve the problem.

3. Insufficient memory, iPad cannot run normally

iPadOS system failure is a common problem. When this happens to the iPad, we can try the following solutions: 1. Restart iPad: Press and hold the power button until the slide to power off prompt appears, then slide to power off, wait a few seconds and then press and hold the power button until the Apple logo appears. 2. Clear the cache: Go to "Settings" - "Safari" - "Clear History and Website Data", and then confirm the clearing. 3. Update the system: Go to "Settings" - "General" - "Software Update" and check if there are available system updates. If so, follow the prompts to update. 4. Restore factory settings: Go to "Settings" - "General" - "About" - "Reset", select "All content and settings", and then confirm the reset. If the above methods still cannot solve the problem, it is recommended to contact Apple customer service or go to an Apple authorized repair center for repair. Before repair, it is recommended to back up important data to avoid loss.

5. Screen failure, such as screen cable failure and other hardware problems

The iPad usage environment is an important factor. If the ambient temperature of the iPad is too high or too low, its normal operation may be affected. Therefore, we need to pay attention to the following points when using iPad: 1. Use in high-temperature environments: In high-temperature environments, the iPad's battery may overheat, causing its performance to degrade or even fail to operate properly. Therefore, when using the iPad in hot weather, it is best to use it in a cool place and avoid exposing it to the sun. In addition, using the iPad for a long time will also generate heat, so the use time can be appropriately reduced to avoid overheating. 2. Use in low-temperature environments: In low-temperature environments, the battery life of the iPad may be shortened, causing the battery power to drop rapidly. Therefore, when using your iPad in low-temperature weather, you can choose to use it indoors and avoid exposing it to cold wind. In addition, you can use a thermal cover or protective case to maintain the temperature of your iPad and avoid overcooling. In short, to keep the iPad in good condition, we need to pay attention to environmental factors. Avoid using your iPad at temperatures that are too high or too low to ensure proper operation and extend its lifespan.

Except for environmental factors and iPad hardware failures, it is possible to repair it yourself. You can refer to the following methods!

Method 1: Uninstall some apps

We know that the iPad Air 5 has a larger screen and stronger performance, because it is also one of the best handheld devices for playing games and painting.

When you use a tablet, you may sometimes encounter some problems, such as screen freezes, screen failure, etc. This may be caused by the limited memory of the tablet. If you encounter the problem of screen failure, I suggest you uninstall some infrequently used apps in time, and then restart the tablet to see if the problem still occurs. Doing this can free up some memory space and help your tablet run properly. So, when you encounter the problem of tablet screen failure, you can try this method to solve it.

If the iPad is stuck and cannot uninstall the APP, it is recommended to try other methods first.

Method 2: Clean iPad memory

iPad Air 5 is not only an artifact for playing games, but also an artifact for editing. Some photography enthusiasts use iPads to edit videos.

As more and more photos and videos are stored, the memory of our devices will become seriously insufficient. At this time, some problems often occur, such as freezing, screen failure, and even white apples.

Therefore, remember to clean up your iPad’s storage space regularly.

Method Three: Forced Restart

When encountering some basic iOS system failures, such as stuck black screen, recovery mode, etc., we can try to use force restart to fix it. Force restarting is a common solution to the problem.

For different models of iPad, the method of force restarting is also different. For iPad Air 5, we only need to perform the following steps to complete the force restart: 1. Press the Volume Up key and Volume Down key quickly. 2. Press and hold the lock screen keys at the same time until the iPad screen turns black and the Apple logo appears. 3. Wait for a moment until the iPad restarts. Through the above operations, we can successfully force restart the iPad Air 5. Hope this method is helpful to everyone!

Method 4: iPadOS system repair

After upgrading, downgrading the iPadOS system, flashing or jailbreaking, etc., if you encounter a stuck screen or screen failure, it is most likely due to the system A BUG has occurred. In this case, we need to take some measures to solve the problem. First, we can try restarting the device, which sometimes solves the problem. If the problem persists, we can try to factory reset the device, which can clear possible software conflicts or configuration errors. If the problem still cannot be solved, we can contact Apple customer service or go to an Apple authorized repair center for help. In short, when encountering system problems, we should take appropriate measures to solve them in time to ensure the normal use of the equipment.

Not every user using iPad will encounter this problem. In most cases, these problems can be solved with some simple fixes, such as force restarting and iOS system repair. Apple provides a tool specifically for repairing iPhones. It is simple to operate and can repair 150 iOS system faults. It is especially suitable for users who are not very technical.

Method 5: Update the iPadOS system in a timely manner

Sometimes the iPad screen suddenly freezes, which may also be related to the iPadOS system. You can upgrade the iPad system to the latest version in time.

If you have tried the above 5 methods and still cannot solve the problem of iPad Air 5 suddenly freezing and screen failure, then there may be some hardware failure.

If your iPad has hardware problems, I suggest you send it to an Apple after-sales center for inspection and repair. Generally speaking, it is difficult for ordinary users to fix such problems by themselves.

The above is the detailed content of 5 ways to fix iPad Air 5 screen failure. Do you need to replace the screen?. For more information, please follow other related articles on the PHP Chinese website!