What to do if the IP address conflicts with other systems on the network
The IP address conflicts with other systems on the network because the IP conflicts, resulting in the inability to access the Internet. The solution is: 1. Set it to be automatically obtained by DHCP; 2. Modify the local IP address.
The operating environment of this article: windows7 system, DELL G3 computer
What should I do if the IP address conflicts with other systems on the network?
The reason why IP addresses conflict with other systems on the network is that they are all connected to the Internet through a router, so IP conflicts are inevitable. This results in the inability to access the Internet.
To solve this problem, you can follow the following steps.
1. Set it to be automatically obtained by DHCP
If the computer is in a LAN and the network card IP address is automatically assigned by the LAN server, you can click the "Start" button and select " "Command Prompt" in "Attachments", enter "Ipconfig /renew" in the command line state to let the system release the current IP address and obtain a new one.
If the computer’s IP address is a fixed IP address, you can set another one.
2. Modify the local IP address
In the "This connection uses the following components" list box in the "General" tab of the computer, select " Internet Protocol (TCP/IP)" and click the "Properties" button. In the "Internet Protocol (TCP/IP) Properties" dialog box that appears, select the "Use the following IP address" radio button in the "General" tab, and then fill in the required text box below. IP address, subnet code and default gateway.
Extended information:
IP address conflicts with other systems on the network Reasons:
1. The IP address is equivalent to each The computer's unique ID number is in a LAN environment. If your computer's IP is set to 192.168.2.10, and the IP of another computer is also set to 192.168.2.10, it will cause IP conflicts with other systems.
2. Virus problem: caused by LAN ARP virus attack. ARP, the Address Resolution Protocol, realizes knowing the physical address through the IP address. The ARP protocol is a protocol of the TCP/IP protocol suite and is used to translate network addresses into physical addresses (also known as MAC addresses). ARP virus is not the name of a specific virus, but a general term for a class of viruses that exploit vulnerabilities in the ARP protocol to spread.
For more related knowledge, please visit the FAQ column!
The above is the detailed content of What to do if the IP address conflicts with other systems on the network. For more information, please follow other related articles on the PHP Chinese website!

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SublimeText3 Chinese version
Chinese version, very easy to use

Zend Studio 13.0.1
Powerful PHP integrated development environment

Dreamweaver CS6
Visual web development tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

Hot Topics

Xiaohongshu is a popular social e-commerce platform where users can share their daily life and discover their favorite products. Some users are more sensitive to personal privacy and hope that their IP address will not be displayed on Xiaohongshu to protect their online privacy. So, how to set Xiaohongshu not to display the IP address? This article will answer this question in detail. 1. How to set Xiaohongshu not to display the IP address? 1. Modify Xiaohongshu settings: Open Xiaohongshu APP, click "Me" in the lower right corner to enter the personal center. Then click on the avatar to enter account settings. In the account settings, find "Privacy Settings" and click to enter. Here, you can find the setting options for IP address, just turn it off. 2. Clear cache: Sometimes, Xiaohongshu may display an error

How to view all IP addresses on the LAN using cmd: 1. Press the "Win+R" shortcut key to open the "Run" window; 2. After entering "CMD" in the "Run" window, press the Enter key; 3. In the open "Command" In the "Prompt" interface, enter the command "arp -a" and press the Enter key; 4. From the returned results, you can see the IP addresses of all computers in the local LAN that communicate with the machine.

Sometimes everyone encounters the need to manually modify the IP address, but some Windows 10 customers report that the IP address cannot be saved after setting it. How to solve this situation? The IP address is stored basically because there is an error in filling in your IP address. You can check whether the subnet prefix has been written with the subnet mask. If so, change it back. After the change, you can save it normally. IP address. How to solve the problem that the Windows 10 IP address cannot be saved after it is set: The error picture is as follows: The prompt "Unable to save the IP setting, please check one or more settings and try" caused by filling in the error. This is the subnet prefix length, not the subnet mask. as the picture shows. As shown in the picture above, many users actually write out the subnet prefix as the subnet mask.

Where is the IP address of Xiaomi mobile phone? You can check the IP address on Xiaomi mobile phone, but most users don’t know where to check the IP address. Next is the graphic tutorial on how to check the IP address of Xiaomi mobile phone brought by the editor. Interested users come and take a look! Where is the IP address of Xiaomi mobile phone? 1. First open the settings function in Xiaomi mobile phone, select [My Device] and click to enter; 2. Then on the My Device function page, click [All Parameters] service; 3. Then on the All Parameters page , slide to the bottom and select [Status Information]; 4. Finally, you can see the IP address in the status information interface.

Xianyu is a very practical second-hand trading platform. Here we can buy many different products and sell our own idle items. What if we want to modify our address? Let’s take a look with the editor below! Share how to modify the Xianyu IP address. First, open the Xianyu software. After entering the homepage, you can see seafood market, recommendations, address and other options in the upper left corner. Click "Address". 2. Then on the address page, we click the [Down Arrow] next to the address; 3. After the final click, we click on the city on the city selection page;

Users share their lives, show off their talents, and interact with netizens across the country and even the world through Douyin. Some users wish to change their IP addresses on Douyin due to reasons such as privacy protection or geographical restrictions. So, how does the Douyin IP address change its location? 1. How to change the location of Douyin IP address? A proxy server is an intermediary service used to forward user requests to the Internet and return responses. By configuring a proxy server, users can hide their real IP addresses and change their IP addresses. This approach helps protect user privacy and improves network security. Proxy servers can also be used to access restricted content or bypass geolocation restrictions. Overall, using a proxy server is a practical network tool that can help users browse the Internet more safely and freely.

An IP address is composed of 32 or 128-bit binary numbers. IP address is a unified address format provided by the IP protocol. There are two types of IP addresses: 1. IPv4 address, consisting of 32-bit binary numbers, expressed in dotted decimal notation, divided into eight bits, that is, four 0~255 Decimal number; 2. IPv6 address consists of 128-bit binary numbers, expressed in dotted hexadecimal, divided into eight bits, that is, sixteen hexadecimal numbers from 0x00 to 0xff.

Each host has a unique address identifier called an "IP address." The IP address is a unified address format provided by the IP protocol. It assigns a unique logical address to each network and each host on the Internet to shield the differences in physical addresses. Because of this unique address, it is ensured that users can efficiently and conveniently select the objects they need from thousands of computers when operating on connected computers.