I2C HID Device Code 10 Happens on Win11/10? 8 Proven Tips

Have you encountered problems with I2C HID device code 10 on your Windows 11/10 computer? Learn how to fix code 10 errors with some proven solutions. Here, MiniTool will provide you with detailed guidance to help you solve your problem.

Quick Navigation: - I2C HID Device Cannot Start Code 10 - Fix 1: Disable and Enable I2C HID Device - Fix 2: Change Power Management Settings - Fix 3: Uninstall I2C HID Device Driver - Fix 4: Uninstall and reinstall HID-compliant mouse driver - Fix 5: Update I2C HID Device Driver - Fix 6: Change BIOS Settings - Fix 7: Update Windows and BIOS - Fix 8: Edit Registration

I2C HID device cannot start code 10

One common mistake that often frustrates you when you use a laptop is I2C HID device code 10. For many laptops, touchpad-related problems occur from time to time. The multi-touch/multi-finger touch of the touchpad stops working after being used for a period of time. After restarting, the touchpad can work again, but the problem still exists.

If you check the device driver, you will notice a yellow mark on the I2C HID device. After right-clicking it under the human-computer interface device and selecting properties , an error message will appear under the General tab of the device status section, saying " This device cannot be started (Code 10) ".

I2C HID device error code 10 has been reported by many users in multiple forums. It usually happens on Dell laptops. Of course, this may happen to other brands of laptops. We found several possible solutions from these forums. Please try one by one until you solve the problem.

Fix 1: Disable and enable I2C HID devices

Reddit users provide a temporary quick fix that proves helpful. Therefore, disable and enable this device by following the steps below.

Step 1: In Device Manager , expand the human-computer interface device and find the I2C HID device .

Step 2: Right-click on the device and select Disable Device .

Step 3: Keep everything on and put your computer to sleep. Then, turn on again and enable the I2C HID device. Now, it should work properly without code 10 errors anymore.

Fix 2: Change the power management settings

I2C HID device code 10 may occur if you set up wrong power management. Check now:

Step 1: Right-click on the I2C HID device and click Properties .

Step 2: Under the Power Management tab, uncheck Allow the computer to turn off this device to save power .

Step 3: Save the changes by clicking OK .

Fix 3: Uninstalling the I2C HID device driver

According to Reddit users, this solution works. Therefore, if you encounter I2C HID device error code 10, you might as well try it.

Step 1: Locate the device in Device Manager and select Uninstall the device from the context menu.

Step 2: Launch Windows 11/10 to the Advanced Startup page and start to UEFI/BIOS.

Step 3: Stay there for a few minutes, then exit the BIOS and boot back to Windows again.

Fix 4: Uninstall and reinstall the HID-compliant mouse driver

By uninstalling and reinstalling the HID-compliant mouse driver, it is possible to fix the I2C HID device's failure to start code 10.

To do this:

Step 1: Expand the mouse and other pointing devices in Device Manager.

Step 2: Find the HID-compliant mouse , right-click it, and select Uninstall Device .

Step 3: Restart your computer and Windows will automatically install the drivers.

Fix 5: Update I2C HID device drivers

For many users, the I2C HID device code 10 can be solved by updating the driver. Please follow the instructions below:

Step 1: Locate the device and select Update driver .

Step 2: Go to Browse My Computer to Find Drivers > Let me select from the list of drivers available on my computer .

Step 3: Click Next .

Note: This is very important. Do not select anything from the model section. Step 4: Restart the system. Your touchpad should work properly and no longer appear I2C HID device error code 10.

Fix 6: Change BIOS settings

By changing the touchpad status in the BIOS, some users have solved the I2C HID device code 10. So it's worth a try.

Step 1: Press F2 , Del or other startup keys to enter the BIOS menu.

Step 2: Move to the main tab and change your touchpad status from Advanced to Basic, or from Basic to Advanced, displaying according to your laptop.

Step 3: Save the changes and restart.

Step 4: Then, go to the BIOS again and change the touchpad state from Basic to Advanced, or from Advanced to Basic.

Then, error code 10 should disappear.

Fix 7: Update Windows and BIOS

Make sure you are using the latest Windows system and that the BIOS version is the latest.

Windows update issues and errors during BIOS updates can lead to potential data loss. To avoid this nightmare, we strongly recommend that you back up important files before updating. MiniTool ShadowMaker is a professional and reliable backup software for Windows 11/10, providing the best backup and recovery solutions. Get it to start PC backup.

To update Windows, go to Settings > Windows Update , check for available updates, and install them.

To update the BIOS on your PC, such as a Dell laptop, refer to the Dell BIOS Update Guide.

Fix 8: Edit the registry

Additionally, if you encounter I2C HID device code 10, changing some settings in the Windows registry may also work. Before proceeding, remember to manually create a restore point or use MiniTool ShadowMaker to make a system image, as errors may cause the system to fail to boot.

First, make sure your I2C HID device driver is the latest version. Then, follow what the user said. Let's see a screenshot.

The above is the detailed content of I2C HID Device Code 10 Happens on Win11/10? 8 Proven Tips. For more information, please follow other related articles on the PHP Chinese website!