6 Ways to Fix Windows 10 Keeps Restarting after Update

Restart repeatedly after Windows 10 update? Detailed explanation of the solution!

There are repeated restart problems after the system is updated, which is very troublesome. This article analyzes common reasons for repeated restarts after Windows 10 updates and provides effective solutions.

1. Reasons for repeated restarts after Windows 10 update

The "Restart repeatedly after Windows 10 update" problem is usually caused by the following reasons:

• System Setting Error: The automatic restart function may cause the system to restart continuously.
• Driver Problem: Windows drivers may be corrupted or expired.
• System file corrupt: The corrupted system file cannot run normally.
• Update failed: An error occurred during the update process, causing the system to fail to start normally.
• Hardware failure: CPU overheating, memory dust accumulation, external equipment failure, etc.

2. Solution to repeated restarts after Windows 10 update

For the above reasons, the following six methods can be tried to solve the problem:

Method 1: Disable automatic restart

If you cannot log in to Windows, please enter safe mode with network first. Press the power button several times to restart the computer until the "Prepare to Automatic Repair" interface appears. After the diagnosis is complete, click Advanced Options > Troubleshooting > Advanced Options > Start Settings > Restart . Then press 5 or F5 to select Enable safe mode with network.

If you can log in to Windows, please follow these steps to disable automatic restart:

Step 1: Press Win R to open the run window and enter sysdm.cpl.

Step 2: Select the Advanced option. In the "Startup and Recovery" section, click Set .

Step 3: Uncheck the Auto Restart option, and then click OKTo disable Windows automatic restart.

Method 2: Update the graphics card driver

Expired graphics card drivers may also cause "repeated restarts after Windows 10 update" issues. After updating Windows, the original driver may be incompatible with the latest version. Update the driver can resolve this issue.

Step 1: Press Win X and select Device Manager.

Step 2: Find and expand Show adapter. Right-click on the graphics card driver and click Properties .

Step 3: Click DriverCheck the driver installation date and version. If it expires, click to update the driver .

Method 3: Clean the invalid registry key

Invalid registry keys left during updates may cause system instability. This issue can be resolved using the registry cleaning tool or manual cleaning.

Step 1: (Recommended) Download and install iSumsoft System Refixer and run the tool.

Step 2: Select the Registry tab and click the Scan button to scan the registry.

Step 3: After finding the invalid registry key, click the Clean button to clear it.

(Manual Cleanup Method: Be sure to back up the registry before you start. Start Windows in safe mode and follow these steps:)

1. Press Win R to open the run window.
2. Enter regedit and click OK to open the Registry Editor.
3. File is found. HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCurrentVersionProfileList
Check the ProfileList ID and delete any ProfileImagePath. Then close the window.

Method 4: Adjust the power supply option

Changing the power options may also resolve this issue.

Step 1: Press

Win R , enter and press powercfg.cplEnter.

Step 2: In the Power Options window, select

High Performance, and then click to change the plan settings.

Step 3: In the Edit Schedule Settings window, select

to change advanced power settings .

Step 4: Expand Processor Power Management and double-click

Minimum Processor Status . Next to Set (%), set the number to 5. Then click Apply and Confirm to save the changes.

Method 5: Uninstall the latest update

Problematic updates may cause startup problems. Uninstalling the latest updates may be an effective solution.

Step 1: Press Win I to open the settings, select the Windows Update option on the left, and then click Update History .

Step 2: Select Uninstall update and you will see a list of all updates.

Step 3: Find the latest Windows update (based on date), right-click and click Uninstall .

Method 6: Check hardware problems

1. CPU: Check whether the CPU is overheated, clean the dust or replace the radiator.
2. Memory: Remove the memory stick, clean and reinstall.
3. External devices: Disconnect all external devices and check whether the problem is resolved.

Summary

The above are common ways to solve the problem of repeated restarts after Windows 10 update. If none of the above methods work, try reinstalling Windows or contact Microsoft Support for help.

The above is the detailed content of 6 Ways to Fix Windows 10 Keeps Restarting after Update. For more information, please follow other related articles on the PHP Chinese website!