Hardware Tutorial
Hardware News
Thermaltake launches CT series reversing blade fans: four colors available, supports wire series connection
Thermaltake launches CT series reversing blade fans: four colors available, supports wire series connection
According to news from this site on August 7, Thermaltake launched the CT series of reversing blade fans on the 31st of last month, available in two specifications: 12025 and 14025.
Like many Thermaltake products, the CT series reverse-blade fans are available in four colors: black, white, matcha green, and hydrangea blue.
Compared with the previously launched CT EX reverse-blade fans, the lower-level CT series reverse-blade fans cancel the MagForce 2.0 magnetic contact series connection, but still support more traditional wire series connection, which can simplify wire management to a certain extent.
However, the CT series and CT EX series reverse blade fans are consistent in fan specifications. They both adopt a 9-blade design, are equipped with HDB hydraulic bearings, and are equipped with 9 ARGB LED lamp beads. The specific parameters of the CT series reverse blade fans attached to this site are as follows:
120mm model: speed range 500~2000 RPM, maximum air volume 65.82 CFM, maximum static pressure 1.87 mmH2O, maximum noise 31.2 db (A);
140mm model : The speed range is 500~1800 RPM, the maximum air volume is 94.95 CFM, the maximum static pressure is 2.54 mmH2O, and the maximum noise is 32.8 db (A).
Thermaltake CT series reverse-blade fans are equipped with round anti-vibration rubber pads at the four corners, which can suppress the vibration of the fan and allow the fan to achieve higher rotation speed under the specified noise level.
In addition, this series of fans is also equipped with a 5V ARGB connector clip, which can improve the stability of the ARGB wires when connected in series and prevent them from loosening and falling off.
The above is the detailed content of Thermaltake launches CT series reversing blade fans: four colors available, supports wire series connection. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Undress AI Tool
Undress images for free
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
Continuing the octagonal column design, Thermaltake showcases the see-through Tower 250/600 chassis
Jun 11, 2024 am 10:18 AM
According to news from this site on June 5, Thermaltake exhibited a variety of new chassis products at the 2024 Taipei International Computer Show, including the see-through Tower250/600. Thermaltake has previously launched the M-ATX octagonal column chassis Tower300 with a three-sided glass design of left, front and right front. This time Thermaltake exhibited the ITX model Tower250 and ATX model Tower600 of this series. Tower250 supports ITX motherboards and SFX power supplies, and can be installed with 8 120mm fans and 360 water cooling radiators. Two CT120 fans for air outlet are pre-installed on the top. ▲The picture below is from XFastest. The larger Tower600 supports ATX motherboards including back-plug styles and can be installed on
Thermaltake launches CTE E660 MX chassis: CTE E600 MX facelift, supports back-mounted motherboards
Jul 03, 2024 am 09:36 AM
According to news from this site on July 2, Thermaltake recently launched the CTEE660MX mid-tower E-ATX chassis. This chassis can be regarded as a modification of the previous product CTEE600MX, adding support for back-plugged motherboards. CTEE660MX is available in four colors: black, snow white, hydrangea blue and racing green. It adopts a right-angle full-view side see-through design. The front panel can also be replaced with a mesh ventilation model. At this time, three additional 140 fans can be installed on the front panel, which is compatible with 420 cold radiator. The CTEE660MX continues the design of Thermaltake's CTE (Centralized Thermal Efficiency) series chassis. The motherboard is rotated 90° and the rear I/O panel is installed upward to optimize the airflow channel and enhance the overall cooling performance of the system. The machine
Solution to the problem of the fan still running after shutting down WIN10
Mar 27, 2024 pm 03:01 PM
1. On the WIN10 desktop, right-click the start button in the lower left corner and select the [Run] menu item in the pop-up menu. 2. In the Windows 10 run window that opens, enter the command regedit, and then click OK. 3. The Windows 10 Registry Editor window will open, and locate the HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionpoliciessystem registry entry in the window. 4. Look for the shutdownwithoutlogon registry key on the right side of the opened registry editor. If there is this registry key, skip step five.
ASUS launches TUF Gaming TR120 ARGB case cooling fan, 28mm thick design
Jun 09, 2024 pm 05:24 PM
According to news from this site on May 16, ASUS recently launched a new generation of TUF Gaming product line chassis cooling fans TR120ARGB series, available in black and white. The TR120ARGB fan chooses the 12028 specification, which has been gradually increasing recently. Compared with the previous generation product TF120 Xiaguang (TF120ARGB) fan that uses standard 12025, the extra 3mm thickness of TR120ARGB lays the physical foundation for its improved heat dissipation capacity. This series of fans follows the double-layer LED design of the previous generation products. Each fan has 16 ARGB lamp beads and also contains a translucent light-transmitting area on the side. ASUS TUFGamingTR120ARGB series fans include standard and reverse blade versions, suitable for cooling in various chassis
Gujia launches SC140 series of infinite mirror lighting fans: supports seamless daisy chain connection, including reverse leaf version
Aug 01, 2024 pm 12:09 PM
According to the news from this site on August 1, French media CowcotLand reported that Gujia’s overseas official website has added a new SC140 fan, which is available in black and white colors, and both front-leaf and reverse-leaf versions are available. As of the time of publication of this website, the official website of Gujia Simplified Chinese has not yet launched this series of products. ▲SC140 fan with reverse blades. The white Gujia SC140 fan supports tool-free seamless daisy chain buckle connection. It is a rare 140mm model among "building block fans". Due to power supply limitations, Gujia recommends that a set of SC140 fans should not exceed 3 when connected in series with snap-on connections. ▲The series connection effect of Zhengye black building blocks. The shaft cover part of this series of fans adopts an "infinity mirror" design. The left and right sides of the fan frame support ARGB lighting effects, and the edge areas of the front and back sides are also outlined with light bars.
How to Adjust Fan Automatic Speed Control in BIOS
Feb 19, 2024 am 10:00 AM
BIOS (Basic Input/Output System) is an important part of the computer system and is responsible for hardware initialization and configuration when the computer starts. In the BIOS, users can adjust various functions and settings of the computer, including automatic fan speed adjustment. The automatic speed adjustment function of the fan can not only ensure the cooling of the computer, but also reduce noise and energy consumption. The following will introduce how to realize automatic fan speed adjustment by setting BIOS. Step 1: Enter the BIOS setting interface. First, you need to restart the computer and enter the BI
Thermaltake launches CTE E550 TG mid-tower chassis with tempered glass panels on the front, left and rear sides
Sep 02, 2024 pm 07:31 PM
According to news from this site on September 2, Thermaltake announced today the launch of the CTEE550TG mid-tower chassis. The chassis adopts a dual-chamber design, with the motherboard installed 90° counterclockwise and equipped with tempered glass panels on the front, left, and rear sides. The CTEE550TG chassis supports 12"×10.5" E-ATX motherboards and is also compatible with back-plug motherboard models. Because the motherboard is rotated so that the "rear" I/O connectors face upward in this case, devices connected to the "rear" connectors require longer cable lengths. This chassis supports three graphics card installation methods, namely hanging without using PCIe extension cable, hanging and flipping using extension cable, and floating installation using both extension cable and floating bracket. This site organizes Thermaltake CTEE550T
Triangular symmetrical back frame design, Limin launches TL-K12R series reverse air outlet fans
Jul 31, 2024 pm 08:25 PM
According to news from this site on July 31, French media CowcotLand reported that Limin’s official website has officially launched the TL-K12R series of reverse air fans. Note from this site: Although the official website of Limin shows that the black TL-K12R and the white TL-K12RW will be released in August 2023, the relevant page cache before July 29, 2024 has not been found, and both fans are listed. At the front of the Limin fan page. The TL-K12R series has standard 12025 specifications, adopts a 9-blade design, is equipped with S-FDBV2 magnetic fluid dynamic bearings, and is embellished with ARGB light segments on both sides. Limin said that the TL-K12R series fans adopt a triangular symmetrical back frame design, which increases the effective air outlet area by 23% and improves the structural compressive strength.
