Home

Technical Resources

What does uplink port mean?

141

uplink port Common interface

Table of Contents

The uplink port is a port used to facilitate cascading between two switches. It is connected to other hubs or switches through a port of the hub. After cascading, each hub or switch is still logically managed by the network. Equipment; equipment connected through a cascade port does not require a Cross-over cable. It uses the same channel as its adjacent ordinary UTP port. Therefore, if the Uplink port is used, the other adjacent ordinary port cannot be used. .

Jan 02, 2021 pm 04:58 PM

uplink port

How to use the uplink interface

How to use the uplink interface: When cascading, you can use a normal network cable to connect the ordinary port of one switch to the Uplink port of another switch. If both devices are connected using the Uplink port, one end of the network cable needs to use the [EIA/TIA 568A] standard, and the other end needs to use the [..568B] standard.

Mar 15, 2021 pm 01:39 PM

What is the difference between an uplink port and a normal interface?

Differences: 1. Different definitions: the uplink port is a port set up for cascading between two switches, while the ordinary interface is configured for computer use; 2. The use effect is different: if the Uplink port is used, the adjacent Ordinary ports can no longer be used, and the use of ordinary interfaces will not affect the uplink port; 3. Different connection standards: two uplink ports are connected, and the network cable needs to use the 568A standard on one end and the 568B standard on the other end. The uplink port is connected to the ordinary interface, and both ends use the same standard.

Mar 12, 2024 pm 04:55 PM

uplink port Common interface